Important!
This replacement procedure can be used for:
CITROËN C1 (PM_, PN_) 1.4 HDi View more

The steps may slightly vary depending on the car design.

How to change rear wheel bearing / rear hub bearing on CITROEN C1 (PM, PN) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Wheel Bearing for C1 (PM_, PN_) and other CITROËN models
How to change Wheel bearing kit on Citroen C1 Mk1 1.0 – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing on Citroen C1 Mk1 1.0 – step-by-step instructions for straightforward car repair Wheel bearing
Tools
Replacement: wheel bearing – Citroen C1 1 PM PN. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torx bit T30
Drive socket # 12
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Impact screwdriver
Hub slide hammer puller
Wheel chock
Replacement: wheel bearing – Citroen C1 1 PM PN. Tip from AUTODOC experts:
  • Do not re-use the bearing assembly of your Citroen C1 1 PM PN car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – Citroen C1 1 PM PN. Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Citroen C1 Mk1 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN C1 (PM_, PN_) 1.0 2006 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Citroen C1 Mk1 1.4 HDi 2007 Wheel Bearing replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Wheel Bearing on CITROËN C1 (PM_, PN_) 1.4 HDi 2008 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Citroen C1 1 PM PN
  5. Step 5
    How to remove CITROËN C1 1.0 2009 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Wheel Bearing on CITROËN C1 (PM_, PN_) 2010: download PDF manuals and video instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  7. Step 7
    How hard is it to do yourself: Wheel Bearing replacement on Citroen C1 Mk1 1.0 2011 - download illustrated guide
    Unscrew the brake drum fastening. Use Torx T30. Use an impact screwdriver.
  8. Step 8
    Need to know how to renew Wheel Bearing on CITROËN C1 2012? This free workshop manual will help you to do it yourself
    Remove the brake drum.
    Replacement: wheel bearing – Citroen C1 1 PM PN. AUTODOC recommends:
    Examine the brake drum. Replace it if necessary.
  9. Step 9
    Changing of Wheel Bearing on Citroen C1 Mk1 2013 won't be an issue if you follow this illustrated step-by-step guide
    Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
  10. Step 10
    CITROËN C1 1.0 Wheel Bearing replacement: online guides and video tutorials
    Unscrew the ABS sensor fastener. Use Torx T30. Use a ratchet wrench.
  11. Step 11
    Replacing Wheel Bearing on Citroen C1 Mk1 2005 1.0 by yourself
    Disconnect the ABS sensor.
  12. Step 12
    C1 (PM_, PN_) 1.0 2006 Wheel Bearing DIY replacement workshop manual
    Clean the wheel hub fastener. Use a wire brush. Use WD-40 spray.
  13. Step 13
    How to change Wheel Bearing on CITROËN C1 (PM_, PN_) 2007 - tips and tricks
    Unscrew the hub bearing mounting. Use a drive socket #12. Use a ratchet wrench. Use a tap wrench.
  14. Step 14
    Step-by-step recommendations for DIY replacement Citroen C1 Mk1 2008 1.0 Wheel Bearing
    Remove the hub and the bearing together, since they are a sealed unit. Use the hub slide hammer puller.
  15. Step 15
    DIY replacement of Wheel Bearing on CITROËN C1 (PM_, PN_) 1.0 2009 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing mounting seat. Use a wire brush.
  16. Step 16
    How to change Wheel Bearing on Citroen C1 Mk1 2005 - free PDF and video manuals
    Install the new wheel hub with a bearing.
  17. Step 17
    How to replace CITROËN C1 (PM_, PN_) 1.0 2006 Wheel Bearing - step-by-step manuals and video guides
    Tighten the fastener of the wheel hub bearing. Use a drive socket #12. Use a torque wrench. Tighten it to 60 nm torque.
    Replacement: wheel bearing – Citroen C1 1 PM PN. Professionals recommend:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN C1 (PM_, PN_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN C1 (PM_, PN_) Wheel Bearing replacement - online guide
Tips & tricks for your CITROËN C1 (PM_, PN_)
View more
  • How to change Wheel bearings on CITROËN C1 (PM_, PN_) 1.0 - replacement tricks
    How to find and change a fuse | AUTODOC
  • Changing Hub bearing Citroen C1 Mk1 1.0 - Replacement Tips
    How to prevent car windows from fogging up | AUTODOC tips
  • Maintenance Hacks - CITROËN C1 (PM_, PN_) 1.4 HDi Wheel bearing kit replacement guide
    Top 5 mistakes when buying car parts
  • Replace Wheel hub bearing on Citroen C1 Mk1 - free video tips
    How to check your head gasket | AUTODOC