Important!
This replacement procedure can be used for:
VW POLO (9N_) 1.4 16V, VW POLO (9N_) 1.9 TDI, VW POLO (9N_) 1.4 TDI, VW POLO (9N_) 1.4 16V, VW POLO (9N_) 1.2 12V, VW POLO (9N_) 1.9 SDI, VW POLO (9N_) 1.2, VW POLO (9N_) 1.4 16V, VW POLO (9N_) 1.4 FSI, VW POLO (9N_) 1.9 TDI, VW POLO (9N_) 1.4 TDI, VW POLO (9N_) 1.4 TDI, VW POLO (9N_) 1.8 GTI, VW POLO (9N_) 1.6 16V, VW POLO (9N_) 1.8 GTi Cup Edition, VW POLO (9N_) 1.2, VW POLO (9N_) 1.2 12V, VW POLO (9N_) 1.4 View more

The steps may slightly vary depending on the car design.

How to change front suspension arm / front control arm on VW POLO 4 (9N) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Control Arm for POLO (9N_) and other VW models
Tools
Replacement: front lower arm – VW Polo 9N. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – VW Polo 9N. AUTODOC experts recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – VW Polo 9N. Take the following steps:
  1. Step 1
    How to change Control Arm on VW Polo Mk4 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW POLO (9N_) 1.4 16V 2002 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    VW Polo Mk4 1.2 12V 2003 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW Polo 9N
  4. Step 5
    Changing Control Arm on VW POLO (9N_) 1.2 2004 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW POLO 1.9 TDI 2005 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
    Replacement: front lower arm – VW Polo 9N. Tip from AUTODOC:
    After applying the spray, wait a few minutes.Wear protective goggles.
  6. Step 7
    How to replace Control Arm on VW POLO (9N_) 2006: download PDF manuals and video instructions
    Unscrew the front arm fastener. Use a drive socket #18. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on VW Polo Mk4 1.4 16V 2007 - download illustrated guide
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #13. Use a tap wrench.
  8. Step 9
    Need to know how to renew Control Arm on VW POLO 2008? This free workshop manual will help you to do it yourself
    Disconnect the spherical joint from the arm.
  9. Step 10
    Changing of Control Arm on VW Polo Mk4 2009 won't be an issue if you follow this illustrated step-by-step guide
    Remove the front fastener of the control arm. Use a drive socket #18.
  10. Step 11
    VW POLO 1.4 TDI Control Arm replacement: online guides and video tutorials
    Clean all joints of the arm. Use WD-40 spray.
  11. Step 12
    Replacing Control Arm on VW Polo Mk4 2011 1.4 16V by yourself
    Remove the arm. Use a crowbar.
  12. Step 13
    POLO (9N_) 1.9 TDI 2012 Control Arm DIY replacement workshop manual
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Control Arm on VW POLO (9N_) 2001 - tips and tricks
    Install a new arm. Use a crowbar.
    Replacement: front lower arm – VW Polo 9N. AUTODOC experts recommend:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  14. Step 15
    Step-by-step recommendations for DIY replacement VW Polo Mk4 2002 1.9 TDI Control Arm
    Install the front fastener of the arm. Use a drive socket #18.
  15. Step 16
    DIY replacement of Control Arm on VW POLO (9N_) 1.4 TDI 2003 is not an issue anymore with our step-by-step tutorial
    Attach the ball joint to the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo IV Hatchback (9N) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW POLO (9N_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW POLO (9N_) Control Arm replacement - online guide
Tips & tricks for your VW POLO (9N_)
View more
  • How to change Control arm on VW POLO (9N_) 1.4 TDI - replacement tricks
    How to restore a damaged thread | AUTODOC tips
  • Changing Wishbone VW Polo Mk4 1.4 16V - Replacement Tips
    Coolant comparison test | AUTODOC
  • Maintenance Hacks - VW POLO (9N_) 1.2 12V Control arms replacement guide
    Top 5 tips to prevent car rust | AUTODOC tips
  • Replace Trailing arm on VW Polo Mk4 - free video tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips