Important!
This replacement procedure can be used for:
RENAULT TWINGO I (C06_) 1.2 16V (C060), RENAULT TWINGO I (C06_) 1.2 16V (C06C, C06D, C06K), RENAULT TWINGO I (C06_) 1.2 (C063, C064), RENAULT TWINGO I (C06_) 1.2 (C067) View more

The steps may slightly vary depending on the car design.

How to change front suspension arm / front control arm on RENAULT TWINGO 1 (C06) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Control Arm for TWINGO I (C06_) and other RENAULT models
How to change Suspension arm on Twingo c06 1.2 – step-by-step instructions for straightforward car repair Suspension arm
How to change Link Set, wheel suspension on Twingo c06 1.2 – step-by-step instructions for straightforward car repair Link Set, wheel suspension
Tools
Replacement: front lower arm – Renault Twingo C06. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Combination spanner #18
Combination spanner #19
Drive socket # 16
Drive socket # 18
Drive socket # 19
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Flat chisel
Crow bar
Rubber mallet
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – Renault Twingo C06. AUTODOC experts recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – Renault Twingo C06. Take the following steps:
  1. Step 1
    How to change Control Arm on Twingo c06 1993 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace RENAULT TWINGO I (C06_) 1.2 1994 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Twingo c06 1.2 16V 1995 Control Arm replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 4
    Changing Control Arm on RENAULT TWINGO I (C06_) 1.0 1996 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. Step 5
    How to remove RENAULT TWINGO 1.2 LPG 1997 Control Arm - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Control Arm on RENAULT TWINGO I (C06_) 1998: download PDF manuals and video instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  7. Step 7
    How hard is it to do yourself: Control Arm replacement on Twingo c06 1.2 16V 1999 - download illustrated guide
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a combination spanner #16. Use a drive socket #16.
  8. Step 8
    Need to know how to renew Control Arm on RENAULT TWINGO 2000? This free workshop manual will help you to do it yourself
    Remove the fastening bolt. Use a rubber mallet.
  9. Step 9
    Changing of Control Arm on Twingo c06 2001 won't be an issue if you follow this illustrated step-by-step guide
    Release the fastener that connects the control arm ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
  10. Step 10
    RENAULT TWINGO 1.0 Control Arm replacement: online guides and video tutorials
    Disconnect the lower arm from the steering knuckle.
  11. Step 11
    Replacing Control Arm on Twingo c06 2003 1.2 by yourself
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  12. Step 12
    TWINGO I (C06_) 1.2 LPG 2004 Control Arm DIY replacement workshop manual
    Loosen the front fastener of the control arm. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench.
  13. Step 13
    How to change Control Arm on RENAULT TWINGO I (C06_) 2005 - tips and tricks
    Remove the fastening bolt.
  14. Step 14
    Step-by-step recommendations for DIY replacement Twingo c06 2006 1.2 LPG Control Arm
    Unscrew the rear arm fastener. Use a combination spanner #19. Use a drive socket #19. Use a tap wrench.
  15. Step 15
    DIY replacement of Control Arm on RENAULT TWINGO I (C06_) 1.2 (C063, C064) 2007 is not an issue anymore with our step-by-step tutorial
    Remove the fastening bolt.
  16. Step 16
    How to change Control Arm on Twingo c06 1993 - free PDF and video manuals
    Remove the arm. Use a crowbar.
  17. Step 17
    How to replace RENAULT TWINGO I (C06_) 1.2 1994 Control Arm - step-by-step manuals and video guides
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  18. Step 18
    Twingo c06 1.2 16V 1995 Control Arm replacement: free workshop manuals
    Install a new arm.
    Replacement: front lower arm – Renault Twingo C06. Professionals recommend:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  19. Step 19
    Changing Control Arm on RENAULT TWINGO I (C06_) 1.0 1996 by yourself
    Install the fastening bolts.
  20. Step 20
    How to remove RENAULT TWINGO 1.2 LPG 1997 Control Arm - online easy-to-follow instructions
    Screw the rear fastener connecting the control arm to the subframe. Use a combination spanner #19. Use a drive socket #19. Use a tap wrench.
  21. Step 21
    How to replace Control Arm on RENAULT TWINGO I (C06_) 1998: download PDF manuals and video instructions
    Screw the front arm fastener. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench.
  22. Step 22
    How hard is it to do yourself: Control Arm replacement on Twingo c06 1.2 16V 1999 - download illustrated guide
    Connect the lower arm to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT TWINGO I (C06_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT TWINGO I (C06_) Control Arm replacement - online guide
Tips & tricks for your RENAULT TWINGO I (C06_)
View more
  • How to change Control arm on RENAULT TWINGO I (C06_) 1.2 (C063, C064) - replacement tricks
    How to clean an engine bay | AUTODOC
  • Changing Wishbone Twingo c06 1.2 - Replacement Tips
    How to detect vacuum leaks using a smoke machine | AUTODOC
  • Maintenance Hacks - RENAULT TWINGO I (C06_) 1.2 16V Control arms replacement guide
    Causes of a worn car boot damper | AUTODOC
  • Replace Trailing arm on Twingo c06 - free video tips
    How to paint a car with a spray can | AUTODOC tips