How to change front strut mount on Renault Kangoo KC01 – replacement guide
downloads:
4
Views:
81
0
Users voted – 0
Important!
This replacement procedure can be used for:
RENAULT KANGOO (KC0/1_) 1.2 (KC0A, KC0K, KC0F, KC01),
RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M),
RENAULT KANGOO (KC0/1_) D 55 1.9 (KC0D),
RENAULT KANGOO (KC0/1_) D 65 1.9 (KC0E, KC02, KC0J, KC0N),
RENAULT KANGOO (KC0/1_) 1.9 dTi (KC0U),
RENAULT KANGOO (KC0/1_) 1.6 16V 4x4 (KC0P, KC0S, KC0L),
RENAULT KANGOO (KC0/1_) 1.5 dCi (KC07),
RENAULT KANGOO (KC0/1_) 1.9 dCi 4x4 (KC0V),
RENAULT KANGOO (KC0/1_) 1.5 dCi (KC08, KC09),
RENAULT KANGOO (KC0/1_) 1.5 dCi,
RENAULT KANGOO (KC0/1_) 1.6 16V bivalent,
RENAULT KANGOO (KC0/1_) 1.5 dCi,
RENAULT KANGOO (KC0/1_) 1.5 dCi,
RENAULT KANGOO (KC0/1_) 1.6 (KC00)
…
View more
The steps may slightly vary depending on the car design.
How to change front strut mount / top munt RENAULT KANGOO 1 (KC) [TUTORIAL AUTODOC]
All the parts you need to replace – Strut Mount for KANGOO (KC0/1_) and other RENAULT models
Replacement: strut mount – Renault Kangoo KC01. AUTODOC recommends:
All mounts of the front shock struts should be replaced simultaneously.
The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
Be sure to replace all self-locking nuts and bolts during installation.
All work should be done with the engine stopped.
Replacement: strut mount – Renault Kangoo KC01. Recommended sequence of steps:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Remove the shock strut mount cap. Use a crowbar.
Step 4
Loosen the upper fastener of the shock strut mount. Use a combination spanner #21. Use HEX No.H6. Use a ratchet wrench.
Step 5
Secure the wheels with chocks.
Step 6
Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 7
Raise the front of the car and secure on supports.
Step 8
Unscrew the wheel bolts.
AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. Renault Kangoo KC01
Step 9
Remove the wheel.
Step 10
Clean the shock strut fasteners. Use a wire brush. Use WD-40 spray.
Step 11
Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a drive socket #21. Use a combination spanner #21. Use a tap wrench.
Step 12
Prop up the steering knuckle. Use a hydraulic transmission jack.
Step 13
Remove the fastening bolts (2 pieces). Use a hammer. Use a pin punch.
Step 14
Unscrew the upper fastening of the shock absorber strut. Use a drive socket #21.
Replacement: strut mount – Renault Kangoo KC01. Tip:
To avoid injuries, hold the shock strut when undoing the fastening bolts.
Step 15
Remove the suspension strut.
Step 16
Set the shock absorber strut on the spring compressor tool.
Replacement: strut mount – Renault Kangoo KC01. Tip from AUTODOC experts:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 17
Compress the spring.
Step 18
Remove the strut piston rod nut. Use HEX No.H6. Use a combination spanner #14. Use a ratchet wrench.
Step 19
Remove the top strut mount.
Step 20
Install a new top shock strut mount.
Step 21
Tighten the shock strut piston rod nut. Use HEX No.H6. Use a combination spanner #14. Use a torque wrench. Tighten it to 60 Nm torque.
Replacement: strut mount – Renault Kangoo KC01. AUTODOC experts recommend:
Check to make sure the spring is positioned correctly. Avoid its misalignment.
Step 22
Decompress the spring.
Step 23
Remove the assembled shock strut.
Step 24
Install the shock strut into the wheel arch.
Step 25
Tighten the upper fastening nut of the shock absorber strut. Do not tighten it.
AUTODOC recommends:
Renault Kangoo KC01 – To avoid injury, hold the suspension strut while screwing in the fastening bolts.
Step 26
Clean the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
Step 27
Fix the shock absorber strut on the steering knuckle.
Step 28
Install and tighten new bolts of the steering knuckle. Use a drive socket #21. Use a combination spanner #21. Use a torque wrench. Tighten it to 140 Nm torque.
Step 29
Remove the support from under the steering knuckle.
AUTODOC recommends:
Replacement: strut mount – Renault Kangoo KC01. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 30
Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 31
Install the wheel.
Replacement: strut mount – Renault Kangoo KC01. Tip from AUTODOC experts:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 32
Screw in the wheel bolts. Use wheel impact socket #19.
Step 33
Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 110 Nm torque.
Step 34
Tighten the shock strut top mount. Use a combination spanner #21. Use HEX No.H6. Use a torque wrench. Tighten it to 62 Nm torque.
Step 35
Install the shock strut mount cap.
Step 36
Remove the fender protection cover.
Step 37
Close the hood.
Step 38
Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Kangoo I (KC) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your RENAULT KANGOO (KC0/1_)
View more
How to choose the right engine oil for your car | AUTODOC
How to reduce fuel consumption | AUTODOC
How to easily repair a punctured tyre | AUTODOC tips
How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
Most commonly replaced car parts on RENAULT KANGOO