Important!

This replacement procedure can be used for:
FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250), FIAT PUNTO (188) 1.2 16V 80 (188.233, .235, .253, .255, .333, .353, .639,..., FIAT PUNTO (188) 1.4, FIAT PUNTO (188) 1.2 Natural Power, FIAT PUNTO (188) 1.2 Bifuel, FIAT PUNTO (188) 1.2 Bipower (188BXA1A) … View more

The steps may slightly vary depending on the car design.

How to change a shock strut mount repair kit on FIAT PUNTO TUTORIAL | AUTODOC

All the parts you need to replace – Strut Mount for PUNTO (188) and other FIAT models

Top strut mount

Repair kit, suspension strut

Anti-Friction Bearing, suspension strut support mounting

Supporting Ring, suspension strut bearing

Suspension Strut Mounting

        Top strut mount for FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250) Petrol (60 hp)
      
        Top strut mount for FIAT PUNTO (188) 1.2 16V 80 (188.233, .235, .253, .255, .333, .353, .639,... Petrol (80 hp)
      
        Top strut mount for FIAT PUNTO (188) 1.4 Petrol (95 hp)
      
        Top strut mount for FIAT PUNTO (188) 1.2 Natural Power Petrol/Natural Gas (CNG) (60 hp)
      
        Top strut mount for FIAT PUNTO (188) 1.2 Bifuel Petrol/Petroleum Gas (LPG) (60 hp)
      
        Top strut mount for FIAT PUNTO (188) 1.2 Bipower (188BXA1A) Petrol/Ethanol (60 hp)

Replacement: strut mount – Fiat Punto 188. Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Combination spanner №17
                      
                        Combination spanner №19
                      
                        Combination spanner №27
                      
                        Drive socket # 15 
                      
                        HEX №H5 wrench
                      
                        Wheel impact socket #17
                      
                        Torque wrench
                      
                        Tap wrench
                      
                        Hammer
                      
                        Flat screwdriver
                      
                        Wheel chock

Buy tools

Replacement: strut mount – Fiat Punto 188. AUTODOC recommends:

The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
Be sure to replace all self-locking nuts and bolts during installation.
All work should be done with the engine stopped.

Replacement: strut mount – Fiat Punto 188. Use the following procedure:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.

Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. Fiat Punto 188
Step 5

Remove the wheel.
Step 6

Disconnect the fastener of the ABS sensor cable from the shock absorber strut. Use a flat screwdriver.
Step 7

Disconnect the brake hose holder from the shock absorber strut. Use a flat screwdriver.
Step 8.1

Unscrew the lower fastener of the shock absorber strut.

Step 8.2

Use a drive socket #15. Use a combination spanner #17.
Step 9

Remove the fastening bolts. Use a hammer.
Step 10

Disconnect the steering knuckle from the shock absorber strut. Use a flat screwdriver.
Step 11

Lower the car.

Step 12

Open the hood.
Step 13

Unscrew the upper fastening of the shock absorber strut. Use a combination spanner #19. Use a tap wrench.

Replacement: strut mount – Fiat Punto 188. Tip:
To avoid injuries, hold the shock strut when undoing the fastening bolts.
Step 14

Remove the suspension strut.
Step 15

Set the shock absorber strut on the spring compressor tool.

Replacement: strut mount – Fiat Punto 188. AUTODOC experts recommend:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 16

Compress the spring.
Step 17

Unscrew the top fastening of the shock strut mount. Use a combination spanner #27. Use a tap wrench.
Step 18

Remove the top strut mount.
Step 19

Clean the mounting seat of the shock strut mount. Use a wire brush.

Step 20

Install a new strut mount.
Step 21

Tighten the upper fastener of the shock absorber strut mount. Use a combination spanner #27. Use a torque wrench. Tighten it to 55 Nm torque.

Replacement: strut mount – Fiat Punto 188. Tip from AUTODOC:
Check to make sure the spring is positioned correctly. Avoid its misalignment.
Step 22

Decompress the spring.

Step 23

Remove the assembled shock strut.

Step 24

Install the shock strut into the wheel arch.

Step 25

Screw the top fastening of the shock strut mount. Do not tighten it.

AUTODOC recommends:
Important! Hold the suspension strut while screwing in the fastening bolts. Fiat Punto 188
Step 26

Tighten the upper fastener of the shock absorber strut mount. Use a combination spanner #19. Use a torque wrench. Tighten it to 55 nm torque.
Step 27

Close the hood.
Step 28

Raise the front of the car and secure on supports.

Step 29

Fix the shock absorber strut on the steering knuckle. Use a flat screwdriver.

Step 30

Install the fastening bolts.

Step 31.1

Tighten the lower fasteners connecting the shock strut to the steering knuckle.

Step 31.2

Use a drive socket #15. Use a combination spanner #17. Use a torque wrench. Tighten it to 75 Nm torque.
Step 32

Fasten the brake hose on the strut.
Step 33

Connect the fastener of the ABS sensor cable to the shock absorber strut.
Step 34

Treat the shock strut fasteners. Use copper grease.

Step 35

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.

Step 36

Install the wheel.

Replacement: strut mount – Fiat Punto 188. Professionals recommend:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 37

Screw in the wheel bolts. Use wheel impact socket #17.

Step 38

Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 98 Nm torque.

Step 39

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front wheel bearing on Fiat Punto 188 – replacement guide

Free download PDF
2.05 MB
How to change front anti roll bar links on Fiat Punto 188 – replacement guide

Free download PDF
1.31 MB
How to change rear wheel bearing on Fiat Punto 188 – replacement guide

Free download PDF
1.47 MB
How to change track rod end on Fiat Punto 188 – replacement guide

Free download PDF
1.55 MB
How to change front lower arm on Fiat Punto 188 – replacement guide

Free download PDF
2.03 MB
How to change front brake pads on Fiat Punto 188 – replacement guide

Free download PDF
1.61 MB

How to change strut mount on a car – replacement tutorial

Universal

Free download PDF
1.04 MB
How to change front strut mount on Fiat Panda 169 – replacement guide

Free download PDF
3.06 MB
How to change front strut mount on Fiat Bravo 2 – replacement guide

Free download PDF
3.37 MB
How to change front strut mount on FIAT 500 C Convertible (312) – replacement guide

Free download PDF
2.96 MB
How to change front strut mount on FIAT 500 Hatchback (312) – replacement guide

Free download PDF
2.96 MB
How to change front strut mount on FIAT PUNTO Van (188AX) – replacement guide

Free download PDF
2.96 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

DIY car soundproofing | AUTODOC tips

75K views

Published on: 15/04/2021
TOP 4 car cleaning products | AUTODOC tips

2K views

Published on: 26/08/2021
Coolant comparison test | AUTODOC

11K views

Published on: 18/02/2021
TOP 5 mistakes during DIY oil change | AUTODOC tips

34K views

Published on: 17/06/2021