Important!
This replacement procedure can be used for:
OPEL Corsa C Hatchback (X01) 1.0 (F08, F68), OPEL Corsa C Hatchback (X01) 1.8 (F08, F68), OPEL Corsa C Hatchback (X01) 1.7 DTI (F08, F68), OPEL Corsa C Hatchback (X01) 1.7 DI (F08, F68), OPEL Corsa C Hatchback (X01) 1.4 (F08, F68), OPEL Corsa C Hatchback (X01) 1.0 (F08, F68), OPEL Corsa C Hatchback (X01) 1.3 CDTI (F08, F68), OPEL Corsa C Hatchback (X01) 1.2 Twinport (F08, F68), OPEL Corsa C Hatchback (X01) 1.4 Twinport (F08, F68), OPEL Corsa C Hatchback (X01) 1.7 CDTI (F08, F68) View more

The steps may slightly vary depending on the car design.

How to change front wheel bearing on OPEL CORSA C TUTORIAL | AUTODOC

video
All the parts you need to replace – Wheel Bearing for Corsa C Hatchback (X01) and other OPEL models
How to change Wheel bearing kit on Opel Corsa C 1.2 (F08, F68) – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on Opel Corsa C 1.2 (F08, F68) – step-by-step instructions for straightforward car repair
Wheel bearing
How to change Cap, wheel bearing on Opel Corsa C 1.2 (F08, F68) – step-by-step instructions for straightforward car repair
Cap, wheel bearing
Tools
Replacement: wheel bearing – Opel Corsa C. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # 18
Drive socket # E18
Drive socket # 30
Torx bit T30
HEX №H5 wrench
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Nippers
Bush and bearing driver set
Circlip pliers
Ball joint puller
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your Opel Corsa C car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – Opel Corsa C – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Opel Corsa C 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 3
    How to replace OPEL Corsa C Hatchback (X01) 1.2 (F08, F68) 2001 Wheel Bearing - step-by-step manuals and video guides
    Raise the front of the car and secure on supports.
  3. Step 4
    Opel Corsa C 1.0 (F08, F68) 2002 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Opel Corsa C
  4. Step 5
    Changing Wheel Bearing on OPEL Corsa C Hatchback (X01) 1.2 Twinport (F08, F68) 2003 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove OPEL CORSA 1.7 DTI (F08, F68) 2004 Wheel Bearing - online easy-to-follow instructions
    Unscrew the caliper bracket fastening. Use a drive socket #E18. Use a ratchet wrench. Use a tap wrench.
  6. Step 8
    How to replace Wheel Bearing on OPEL Corsa C Hatchback (X01) 2005: download PDF manuals and video instructions
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – Opel Corsa C. Tip:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Opel Corsa C 1.7 DI (F08, F68) 2006 - download illustrated guide
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Wheel Bearing on OPEL CORSA 2007? This free workshop manual will help you to do it yourself
    Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench.
  9. Step 11
    Changing of Wheel Bearing on Opel Corsa C 2008 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake disc.
  10. Step 12
    OPEL CORSA 1.4 Twinport (F08, F68) Wheel Bearing replacement: online guides and video tutorials
    Unscrew the ABS sensor fastening from the steering knuckle. Use HEX No.H5. Use a ratchet wrench.
  11. Step 13
    Replacing Wheel Bearing on Opel Corsa C 2000 1.2 (F08, F68) by yourself
    Remove the ABS sensor from the steering knuckle.
  12. Step 14
    Corsa C Hatchback (X01) 1.7 DTI (F08, F68) 2001 Wheel Bearing DIY replacement workshop manual
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  13. Step 15
    How to change Wheel Bearing on OPEL Corsa C Hatchback (X01) 2002 - tips and tricks
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a ratchet wrench.
  14. Step 16
    Step-by-step recommendations for DIY replacement Opel Corsa C 2003 1.7 DTI (F08, F68) Wheel Bearing
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  15. Step 17
    DIY replacement of Wheel Bearing on OPEL Corsa C Hatchback (X01) 1.3 CDTI (F08, F68) 2004 is not an issue anymore with our step-by-step tutorial
    Clean the shock strut fasteners. Use a wire brush. Use WD-40 spray.
  16. Step 18
    How to change Wheel Bearing on Opel Corsa C 2000 - free PDF and video manuals
    Unscrew the lower fastener of the shock absorber strut. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  17. Step 19
    Remove the fastening bolt.
    Step 20
    How to replace OPEL Corsa C Hatchback (X01) 1.2 (F08, F68) 2001 Wheel Bearing - step-by-step manuals and video guides
    Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
  18. Step 21
    Opel Corsa C 1.0 (F08, F68) 2002 Wheel Bearing replacement: free workshop manuals
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  19. Step 22
    Changing Wheel Bearing on OPEL Corsa C Hatchback (X01) 1.2 Twinport (F08, F68) 2003 by yourself
    Remove the fastening bolt. Use a hammer.
  20. Step 23
    How to remove OPEL CORSA 1.7 DTI (F08, F68) 2004 Wheel Bearing - online easy-to-follow instructions
    Remove the cotter pin securing the hub nut. Use nippers.
  21. Step 24
    How to replace Wheel Bearing on OPEL Corsa C Hatchback (X01) 2005: download PDF manuals and video instructions
    Unscrew the wheel hub fastening nut. Use a drive socket #30. Use a tap wrench.
  22. Step 25
    How hard is it to do yourself: Wheel Bearing replacement on Opel Corsa C 1.7 DI (F08, F68) 2006 - download illustrated guide
    Remove the fastening bolt.
  23. Step 26
    Need to know how to renew Wheel Bearing on OPEL CORSA 2007? This free workshop manual will help you to do it yourself
    Disconnect the ball joint from the steering knuckle. Use a hammer.
  24. Step 27
    Changing of Wheel Bearing on Opel Corsa C 2008 won't be an issue if you follow this illustrated step-by-step guide
    Remove the steering knuckle together with the hub.
  25. Step 28
    OPEL CORSA 1.4 Twinport (F08, F68) Wheel Bearing replacement: online guides and video tutorials
    Press the wheel hub out from the tapered roller bearing. Use a bush and bearing driver set. Use a hammer.
  26. Step 29
    Replacing Wheel Bearing on Opel Corsa C 2000 1.2 (F08, F68) by yourself
    Remove the retaining ring from the steering knuckle. Use circlip pliers.
  27. Step 30
    Corsa C Hatchback (X01) 1.7 DTI (F08, F68) 2001 Wheel Bearing DIY replacement workshop manual
    Press out the wheel hub bearing. Use a bush and bearing driver set.
    Replacement: wheel bearing – Opel Corsa C. AUTODOC experts recommend:
    Apply special grease to the bearing assembly mounting seat.
  28. Step 31
    How to change Wheel Bearing on OPEL Corsa C Hatchback (X01) 2002 - tips and tricks
    Press the new bearing in the steering knuckle. Use a bush and bearing driver set.
  29. Step 32
    Step-by-step recommendations for DIY replacement Opel Corsa C 2003 1.7 DTI (F08, F68) Wheel Bearing
    Install the retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
OPEL Corsa C Hatchback (X01) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY OPEL Corsa C Hatchback (X01) Wheel Bearing replacement - online guide
Tips & tricks for your OPEL Corsa C Hatchback (X01)
View more
  • How to change Wheel bearings on OPEL Corsa C Hatchback (X01) 1.3 CDTI (F08, F68) - replacement tricks
    How to check your head gasket | AUTODOC
  • Changing Hub bearing Opel Corsa C 1.2 (F08, F68) - Replacement Tips
    How to reduce fuel consumption | AUTODOC
  • Maintenance Hacks - OPEL Corsa C Hatchback (X01) 1.0 (F08, F68) Wheel bearing kit replacement guide
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Replace Wheel hub bearing on Opel Corsa C - free video tips
    TOP 8 mistakes car owners make | AUTODOC tips

Professional manuals for the most common OPEL models