Important!
This replacement procedure can be used for:
NISSAN X-TRAIL (T30) 2.2 Di 4x4

The steps may slightly vary depending on the car design.

How to change front wheel bearing NISSAN X-TRAIL T30 TUTORIAL | AUTODOC

Required tools:
Required tools:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #22
Drive socket # 12
Drive socket # 19
Drive socket # 22
Drive socket # 32
Wheel impact socket #21
Ratchet wrench
Torque wrench
Hammer
Nippers
Crow bar
Flat Screwdriver
Circlip pliers
Bush and bearing driver set
Ball joint puller
Wheel chock
All the parts you need to replace – Wheel Bearing for X-TRAIL (T30) and other NISSAN models
How to change Wheel Bearing on Nissan X Trail t30 2.2 dCi 4x4 – step-by-step instructions for straightforward car repair
Wheel Bearing
How to change Wheel Bearing on NISSAN X-TRAIL (T30) 2.2 Di 4x4 – tips for proper car maintenance
NISSAN X-TRAIL (T30) 2.2 Di 4x4
How to change Wheel Bearing Kit on Nissan X Trail t30 2.2 dCi 4x4 – step-by-step instructions for straightforward car repair
Wheel Bearing Kit
How to change Wheel Bearing Kit on NISSAN X-TRAIL (T30) 2.2 Di 4x4 – tips for proper car maintenance
NISSAN X-TRAIL (T30) 2.2 Di 4x4
AUTODOC recommends:
  • Do not re-use the bearing assembly of your NISSAN X-TRAIL T30 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Wheel Bearing on Nissan X Trail t30 2001 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace NISSAN X-TRAIL (T30) 2.2 dCi 4x4 2002 Wheel Bearing - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #21.
  3. Nissan X Trail t30 2.2 Di 4x4 2003 Wheel Bearing replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Changing Wheel Bearing on NISSAN X-TRAIL (T30) 2.0 4x4 2004 by yourself
    Step 5
    Remove the wheel.
  5. How to remove NISSAN X-TRAIL 2.2 dCi 2005 Wheel Bearing - online easy-to-follow instructions
    Step 6
    Clean the brake caliper bracket fasteners. Use a wire brush.Use WD-40 spray.
    Step 7
    Unscrew the caliper bracket fastening.Use a drive socket #22.Use a ratchet wrench.
  6. How to replace Wheel Bearing on NISSAN X-TRAIL (T30) 2006: download PDF manuals and video instructions
    Step 8
    Remove the brake caliper together with its bracket.
    AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  7. How hard is it to do yourself: Wheel Bearing replacement on Nissan X Trail t30 2.2 DCi FWD 2007 - download illustrated guide
    Step 9
    Remove the brake disc.
  8. Need to know how to renew Wheel Bearing on NISSAN X-TRAIL ? This free workshop manual will help you to do it yourself
    Step 10
    Clean the wheel hub fastener.Use a wire brush.Use WD-40 spray.
    Step 11
    Unscrew the wheel hub axle nut. Use a drive socket #32.
  9. Changing of Wheel Bearing on Nissan X Trail t30 2009 won't be an issue if you follow this illustrated step-by-step guide
    Step 12
    Remove the drive shaft. Use a hammer.
    AUTODOC recommends:
    Make sure that the drive shaft is not unloaded (when the car is jacked).
  10. NISSAN X-TRAIL 2.2 dCi 4x4 Wheel Bearing replacement: online guides and video tutorials
    Step 13
    Remove the cotter pin fixing the tie rod end fastening.Use nippers.
  11. Replacing Wheel Bearing on Nissan X Trail t30 2011 2.2 dCi 4x4 by yourself
    Step 14
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush.Use WD-40 spray.
    Step 15
    Unscrew the end fastening nut to the steering knuckle.Use a drive socket #22.Use a ratchet wrench.
  12. X-TRAIL (T30) 2.2 dCi 2012 Wheel Bearing DIY replacement workshop manual
    Step 16
    Disconnect the tie rod end from the steering knuckle.Use a ball joint puller.
  13. How to change Wheel Bearing on NISSAN X-TRAIL (T30) 2013 - tips and tricks
    Step 17
    Clean the ABS sensor fastener.Use a wire brush.Use WD-40 spray.
    Step 18
    Unscrew the ABS sensor fastener.Use a drive socket #12.Use a ratchet wrench.
  14. Step-by-step recommendations for DIY replacement Nissan X Trail t30 2001 2.2 dCi Wheel Bearing
    Step 19
    Disconnect the ABS sensor.Use a flat screwdriver.
    Step 20
    Clean the fastener that connects the ball joint to the steering knuckle.Use a wire brush.Use WD-40 spray.
    Step 21
    Unscrew the ball joint fastening to the steering knuckle.Use a combination spanner #22.
  15. DIY replacement of Wheel Bearing on NISSAN X-TRAIL (T30) 2.5 4x4 2002 is not an issue anymore with our step-by-step tutorial
    Step 22
    Disconnect the lower arm from the steering knuckle.Use a crowbar. Use a hammer.
  16. How to change Wheel Bearing on Nissan X Trail t30 2001 - free PDF and video manuals
    Step 23
    Clean the fasteners connecting the shock strut to the steering knuckle.Use a wire brush.Use WD-40 spray.
    Step 24
    Unscrew the lower fastener of the shock absorber strut.Use a combination spanner #17.Use a drive socket #19.Use a ratchet wrench.
  17. How to replace NISSAN X-TRAIL (T30) 2.2 dCi 4x4 2002 Wheel Bearing - step-by-step manuals and video guides
    Step 25
    Remove the fastening bolts.
    Step 26
    Remove the steering knuckle together with the hub.
  18. Nissan X Trail t30 2.2 Di 4x4 2003 Wheel Bearing replacement: free workshop manuals
    Step 27
    Press the wheel hub out from the tapered roller bearing.Use a bush and bearing driver set.Use a hammer.
  19. Changing Wheel Bearing on NISSAN X-TRAIL (T30) 2.0 4x4 2004 by yourself
    Step 28
    Remove the retaining rings. Use circlip pliers.Use a flat screwdriver.
  20. How to remove NISSAN X-TRAIL 2.2 dCi 2005 Wheel Bearing - online easy-to-follow instructions
    Step 29
    Press out the wheel hub bearing.Use a bush and bearing driver set.Use a hammer.
  21. How to replace Wheel Bearing on NISSAN X-TRAIL (T30) 2006: download PDF manuals and video instructions
    Step 30
    Install the external retaining ring. Use a flat screwdriver.
    AUTODOC recommends:
    Clear the components and apply a thin layer of grease on the bearing seat.
  22. How hard is it to do yourself: Wheel Bearing replacement on Nissan X Trail t30 2.2 DCi FWD 2007 - download illustrated guide
    Step 31
    Press the new bearing in the steering knuckle.Use a bush and bearing driver set.Use a hammer.
    AUTODOC recommends:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  23. Need to know how to renew Wheel Bearing on NISSAN X-TRAIL ? This free workshop manual will help you to do it yourself
    Step 32
    Install the retaining ring.Use circlip pliers.
  24. Changing of Wheel Bearing on Nissan X Trail t30 2009 won't be an issue if you follow this illustrated step-by-step guide
    Step 33
    Press the wheel hub into the bearing inner race.Use a bush and bearing driver set.
  25. NISSAN X-TRAIL 2.2 dCi 4x4 Wheel Bearing replacement: online guides and video tutorials
    Step 34
    Install the steering knuckle with a hub in assembly.
  26. Replacing Wheel Bearing on Nissan X Trail t30 2011 2.2 dCi 4x4 by yourself
    Step 35
    Install the drive shaft into the wheel hub.
  27. X-TRAIL (T30) 2.2 dCi 2012 Wheel Bearing DIY replacement workshop manual
    Step 36
    Install the fastening bolts.
    Step 37
    Tighten the lower fastening of the shock absorber.Use a combination spanner #17.Use a drive socket #19.Use a torque wrench.Tighten it to 80 Nm torque.
  28. How to change Wheel Bearing on NISSAN X-TRAIL (T30) 2013 - tips and tricks
    Step 38
    Connect the lower arm to the steering knuckle.Use a crowbar.
    Step 39
    Tighten the ball joint fastener. Use a combination spanner #22.Use a torque wrench.Tighten it to 60 nm torque.
  29. Step-by-step recommendations for DIY replacement Nissan X Trail t30 2001 2.2 dCi Wheel Bearing
    Step 40
    Tighten the hub.Use a drive socket #32.Use a torque wrench.Tighten it to 165 nm torque.
  30. DIY replacement of Wheel Bearing on NISSAN X-TRAIL (T30) 2.5 4x4 2002 is not an issue anymore with our step-by-step tutorial
    Step 41
    Connect the ABS sensor.
  31. How to change Wheel Bearing on Nissan X Trail t30 2001 - free PDF and video manuals
    Step 42
    Screw in the ABS sensor fastener.Use a drive socket #12.Use a ratchet wrench.
  32. How to replace NISSAN X-TRAIL (T30) 2.2 dCi 4x4 2002 Wheel Bearing - step-by-step manuals and video guides
    Step 43
    Connect the tie rod end to the steering knuckle.
  33. Nissan X Trail t30 2.2 Di 4x4 2003 Wheel Bearing replacement: free workshop manuals
    Step 44
    Tighten the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #22.Use a torque wrench.Tighten it to 70 nm torque.
  34. Changing Wheel Bearing on NISSAN X-TRAIL (T30) 2.0 4x4 2004 by yourself
    Step 45
    Install the cotter pin fixing the tie rod end fastening.
  35. How to remove NISSAN X-TRAIL 2.2 dCi 2005 Wheel Bearing - online easy-to-follow instructions
    Step 46
    Install the brake disc.
  36. How to replace Wheel Bearing on NISSAN X-TRAIL (T30) 2006: download PDF manuals and video instructions
    Step 47
    Clean the mounting seats of the caliper and its bracket.Use a wire brush.Use WD-40 spray.
    Step 48
    Install the brake caliper together with its bracket.
  37. How hard is it to do yourself: Wheel Bearing replacement on Nissan X Trail t30 2.2 DCi FWD 2007 - download illustrated guide
    Step 49
    Tighten the brake caliper bracket.Use a drive socket #22.Use a torque wrench.Tighten it to 80 Nm torque.
  38. Need to know how to renew Wheel Bearing on NISSAN X-TRAIL ? This free workshop manual will help you to do it yourself
    Step 50
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  39. Changing of Wheel Bearing on Nissan X Trail t30 2009 won't be an issue if you follow this illustrated step-by-step guide
    Step 51
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  40. NISSAN X-TRAIL 2.2 dCi 4x4 Wheel Bearing replacement: online guides and video tutorials
    Step 52
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  41. Replacing Wheel Bearing on Nissan X Trail t30 2011 2.2 dCi 4x4 by yourself
    Step 53
    Screw in the wheel bolts.Use wheel impact socket #21.
  42. X-TRAIL (T30) 2.2 dCi 2012 Wheel Bearing DIY replacement workshop manual
    Step 54
    Lower the car and working in a cross order, tighten the wheel bolts.Use wheel impact socket #21.Use a torque wrench.Tighten it to 120 nm torque.
  43. How to change Wheel Bearing on NISSAN X-TRAIL (T30) 2013 - tips and tricks
    Step 55
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
NISSAN X-TRAIL (T30) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN X-TRAIL (T30) Wheel Bearing replacement - online guide
Tips & tricks for your NISSAN X-TRAIL (T30)
View more
  • How to change Hub bearing on NISSAN X-TRAIL (T30) 2.5 4x4 - replacement tricks
    How to fix a knocking and creaking suspension | AUTODOC
  • Changing Wheel bearing kit Nissan X Trail t30 2.2 dCi 4x4 - Replacement Tips
    How to protect your car from rust | Simple tips from AUTODOC
  • Maintenance Hacks - NISSAN X-TRAIL (T30) 2.2 Di 4x4 Wheel hub bearing replacement guide
    How to check the ball joint for wear | AUTODOC
  • Replace Axle shaft bearing on Nissan X Trail t30 - free video tips
    10 essential tools for car repair | AUTODOC

Manuals for NISSAN models