Important!
This replacement procedure can be used for:
FORD MONDEO III Estate (BWY) 2.2 TDCi, FORD MONDEO III Estate (BWY) 1.8 16V, FORD MONDEO III Estate (BWY) 2.0 16V, FORD MONDEO III Estate (BWY) 2.5 V6 24V, FORD MONDEO III Estate (BWY) 2.0 16V DI / TDDi / TDCi, FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi, FORD MONDEO III Estate (BWY) 2.0 TDCi, FORD MONDEO III Estate (BWY) ST220, FORD MONDEO III Estate (BWY) 1.8 SCi, FORD MONDEO III Estate (BWY) 2.2 TDCi, FORD MONDEO III Estate (BWY) 3.0 V6 24V View more

The steps may slightly vary depending on the car design.

How to change rear shock absorbers on FORD MONDEO 3 TUTORIAL | AUTODOC

video
All the parts you need to replace – Shock Absorber for MONDEO III Estate (BWY) and other FORD models
How to change Shock absorber on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair
Shock absorber
How to change Suspension Strut on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair
Suspension Strut
Tools
Replacement: shock absorbers – Ford Mondeo BWY. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 15
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – Ford Mondeo BWY. AUTODOC recommends:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: shock absorbers – Ford Mondeo BWY. Take the following steps:
  1. Step 1
    How to change Shock Absorber on Ford Mondeo bwy 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD MONDEO III Estate (BWY) 2.0 16V 2001 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Ford Mondeo bwy 2.0 TDCi 2002 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Ford Mondeo BWY
  4. Step 5
    Changing Shock Absorber on FORD MONDEO III Estate (BWY) 1.8 16V 2003 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD MONDEO 2.2 TDCi 2004 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Shock Absorber on FORD MONDEO III Estate (BWY) 2005: download PDF manuals and video instructions
    Unscrew the lower fastener of the shock absorber. Use a drive socket #18. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Shock Absorber replacement on Ford Mondeo bwy ST220 3.0 2006 - download illustrated guide
    Support the stub axle. Use a hydraulic transmission jack.
  8. Step 9
    Need to know how to renew Shock Absorber on FORD MONDEO 2007? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 10
    Changing of Shock Absorber on Ford Mondeo bwy 2000 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the upper fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #15. Use a ratchet wrench. Use a tap wrench.
    Replacement: shock absorbers – Ford Mondeo BWY. AUTODOC experts recommend:
    To avoid injuries, hold the shock absorber when undoing the fastening bolts.
  10. Step 11
    Remove the fastening bolt.
    Step 12
    FORD MONDEO 1.8 SCi Shock Absorber replacement: online guides and video tutorials
    Remove the shock absorber.
    Replacement: shock absorbers – Ford Mondeo BWY. Professionals recommend:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  11. Step 13
    Replacing Shock Absorber on Ford Mondeo bwy 2002 2.0 16V by yourself
    Place the shock absorber in the wheel arch and secure it.
    Replacement: shock absorbers – Ford Mondeo BWY. Tip from AUTODOC:
    To avoid injury, hold the shock absorber cautiously tight when screwing in the fastening bolts.
  12. Step 14
    MONDEO III Estate (BWY) 2.2 TDCi 2003 Shock Absorber DIY replacement workshop manual
    Install the fastening bolts (2 pieces).
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD MONDEO III Estate (BWY) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD MONDEO III Estate (BWY) Shock Absorber replacement - online guide
Tips & tricks for your FORD MONDEO III Estate (BWY)
View more
  • How to change Shocks on FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi - replacement tricks
    Top 6 products for enhancing your car | AUTODOC tips
  • Changing Shock absorbers Ford Mondeo bwy 2.0 16V - Replacement Tips
    How to clean an engine bay | AUTODOC
  • Maintenance Hacks - FORD MONDEO III Estate (BWY) 2.0 TDCi Struts replacement guide
    How to paint a brake caliper | AUTODOC tips
  • Replace Struts and shocks on Ford Mondeo bwy - free video tips
    Checking the starter without removing it | AUTODOC tips