Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.6 D Multijet

The steps may slightly vary depending on the car design.

How to replace rear brake pads / rear brake pad set on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]

Required tools:
Required tools:
Wire brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Copper grease
Drive socket # 13
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Brake Pads on FIAT BRAVO II (198) 2006 - free PDF and video manuals
    Step 1
    Open the bonnet.Unscrew the brake fluid reservoir cap.
  2. How to replace FIAT BRAVO II (198) 1.9 D Multijet 2007 Brake Pads - step-by-step manuals and video guides
    Step 2
    Secure the wheels with chocks.
  3. FIAT BRAVO II (198) 1.6 D Multijet 2008 Brake Pads replacement: free workshop manuals
    Step 3
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  4. Changing Brake Pads on FIAT BRAVO II (198) 1.4 T-Jet 2009 by yourself
    Step 4
    Raise the rear of the car and secure on supports.
  5. How to remove FIAT BRAVA 1.4 LPG 2010 Brake Pads - online easy-to-follow instructions
    Step 5
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  6. How to replace Brake Pads on FIAT BRAVO II (198) 2011: download PDF manuals and video instructions
    Step 6
    Remove the wheel.
  7. How hard is it to do yourself: Brake Pads replacement on FIAT BRAVO II (198) 1.9 D Multijet 2012 - download illustrated guide
    Step 7
    Clean the brake caliper fasteners. Use a wire brush.Use WD-40 spray.
  8. Need to know how to renew Brake Pads on FIAT BRAVA ? This free workshop manual will help you to do it yourself
    Step 8
    Unscrew the brake caliper fastening.Use a drive socket #13.Use a ratchet wrench.
  9. Changing of Brake Pads on FIAT BRAVO II (198) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Remove the brake caliper.Use a crowbar.
    AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  10. FIAT BRAVA 1.4 Brake Pads replacement: online guides and video tutorials
    Step 10
    Remove the brake pads.
    AUTODOC recommends:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  11. Replacing Brake Pads on FIAT BRAVO II (198) 2016 1.9 D Multijet by yourself
    Step 11
    Treat the brake caliper piston.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
    Step 12
    Press in the brake caliper piston.Use brake caliper wind back tool.
  12. BRAVO II (198) 1.4 LPG 2017 Brake Pads DIY replacement workshop manual
    Step 13
    Clean the brake caliper bracket from dirt and dust.Use a wire brush.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  13. How to change Brake Pads on FIAT BRAVO II (198) 2018 - tips and tricks
    Step 14
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    AUTODOC recommends:
    Make sure the disc surface is clean before installing the pads.
  14. Step-by-step recommendations for DIY replacement FIAT BRAVO II (198) 2019 1.4 LPG Brake Pads
    Step 15
    Install new brake pads.
    AUTODOC recommends:
    Make sure the pads are installed with linings facing the disc.
  15. DIY replacement of Brake Pads on FIAT BRAVO II (198) 1.4 2020 is not an issue anymore with our step-by-step tutorial
    Step 16
    Install the brake caliper and fix it.Use a drive socket #13.Use a torque wrench.Tighten it to 35 Nm torque.
  16. How to change Brake Pads on FIAT BRAVO II (198) 2006 - free PDF and video manuals
    Step 17
    Clean the brake disk surface.Use a wire brush.
    Step 18
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  17. How to replace FIAT BRAVO II (198) 1.9 D Multijet 2007 Brake Pads - step-by-step manuals and video guides
    Step 19
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  18. FIAT BRAVO II (198) 1.6 D Multijet 2008 Brake Pads replacement: free workshop manuals
    Step 20
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  19. Changing Brake Pads on FIAT BRAVO II (198) 1.4 T-Jet 2009 by yourself
    Step 21
    Screw in the wheel bolts.Use wheel impact socket #17.
  20. How to remove FIAT BRAVA 1.4 LPG 2010 Brake Pads - online easy-to-follow instructions
    Step 22
    Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 110 Nm torque.
    AUTODOC recommends:
    Check the brake fluid level in the expansion tank and refill if necessary.
  21. How to replace Brake Pads on FIAT BRAVO II (198) 2011: download PDF manuals and video instructions
    Step 23
    Tighten the brake fluid reservoir cap. Close the hood.
    AUTODOC recommends:
    Without starting the engine, press the brake pedal several times until you feel significant resistance.
  22. How hard is it to do yourself: Brake Pads replacement on FIAT BRAVO II (198) 1.9 D Multijet 2012 - download illustrated guide
    Step 24
    Remove the jacks and chocks.
    AUTODOC recommends:
    Slow down smoothly for first 150-200 km after the brake pads replacement. Avoid unneccessary and sharp braking to a stop.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Vehicle maintenance log book
Know what, when and how to repair, and manage your car expenses
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
FIAT BRAVO II (198) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT BRAVO II (198) Brake Pads replacement - online guide
Tips & tricks for your FIAT BRAVO II (198)
View more
  • How to change Brake pad set on FIAT BRAVO II (198) 1.4 - replacement tricks
    How to choose the right dash cam for your car | AUTODOC
  • Changing Disk pads FIAT BRAVO II (198) 1.9 D Multijet - Replacement Tips
    What to do if your check engine light is on | Tips from AUTODOC
  • Maintenance Hacks - FIAT BRAVO II (198) 1.6 D Multijet Brake pad set disc brake replacement guide
    Basic rules for driving all types of transmissions | AUTODOC
  • Replace Brake pad set on FIAT BRAVO II (198) - free video tips
    Types and features of run-flat tyres | AUTODOC