Important!
This replacement procedure can be used for:
TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.4 4WD (ACA31, ACA33), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 4WD (ACA30_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D 4WD (ALA30_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D 4WD (ALA30_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 3.5 4WD (GSA33), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 (ZSA35_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 4WD (ZSA30_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D 4WD (ALA30_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D (ALA35_), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 (ZSA35), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 4WD (ZSA30), TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 3.5 4WD (GSA33) View more

The steps may slightly vary depending on the car design.

How to change rear suspension arm / rear control arm on TOYOTA RAV 4 3 (XA30) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Control Arm for RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) and other TOYOTA models
Tools
Replacement: rear suspension lower control arm – Toyota RAV4 III. List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Combination spanner #17
Combination spanner #27
Drive socket # 17
Wheel impact socket #21
Torque wrench
Crow bar
Ball joint puller
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower control arm – Toyota RAV4 III. Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Toyota RAV4 III 2005 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    How to replace TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D 4WD (ALA30_) 2006 Control Arm - step-by-step manuals and video guides
    Raise the rear of the car and secure on supports.
  3. Step 4
    Toyota RAV4 III 2.0 4WD (ACA30_) 2007 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower control arm – Toyota RAV4 III. Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 4WD (ZSA30_) 2008 by yourself
    Remove the wheel.
  5. Step 6
    How to remove TOYOTA RAV4 2.0 (ZSA35_) 2009 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2010: download PDF manuals and video instructions
    Unscrew the arm fastening to the beam. Use a combination spanner #17 (2 pieces).
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Toyota RAV4 III 2.0 4WD (ZSA30) 2011 - download illustrated guide
    Remove the fastening bolt. Use a crowbar.
  8. Step 9
    Need to know how to renew Control Arm on TOYOTA RAV4 2012? This free workshop manual will help you to do it yourself
    Support the stub axle. Use a hydraulic transmission jack.
  9. Step 10
    Changing of Control Arm on Toyota RAV4 III 2013 won't be an issue if you follow this illustrated step-by-step guide
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  10. Step 11
    TOYOTA RAV4 2.2 D 4WD (ALA30_) Control Arm replacement: online guides and video tutorials
    Unscrew the lower fastener of the shock absorber. Use a drive socket #17. Use a combination spanner #17.
  11. Step 12
    Replacing Control Arm on Toyota RAV4 III 2006 2.2 D 4WD (ALA30_) by yourself
    Remove the fastening bolt.
  12. Step 13
    RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 (ZSA35_) 2007 Control Arm DIY replacement workshop manual
    Detach the lower part of the shock absorber.
  13. Step 14
    How to change Control Arm on TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2008 - tips and tricks
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  14. Step 15
    Step-by-step recommendations for DIY replacement Toyota RAV4 III 2009 2.0 (ZSA35_) Control Arm
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #17.
  15. Step 16
    DIY replacement of Control Arm on TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D (ALA35_) 2010 is not an issue anymore with our step-by-step tutorial
    Remove the fastening nut.
  16. Step 17
    How to change Control Arm on Toyota RAV4 III 2005 - free PDF and video manuals
    Remove the arm. Use a ball joint puller.
    Replacement: rear suspension lower control arm – Toyota RAV4 III. AUTODOC experts recommend:
    Adjust the length of the free portion of the thread on the new suspension arm. The length should be the same as on the old suspension arm. This will prevent wheel misalignment.
  17. Step 18
    How to replace TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D 4WD (ALA30_) 2006 Control Arm - step-by-step manuals and video guides
    Tighten the lock nut of the suspension arm. Use a combination spanner #27. Use a torque wrench. Tighten it to 55 nm torque.
  18. Step 19
    Toyota RAV4 III 2.0 4WD (ACA30_) 2007 Control Arm replacement: free workshop manuals
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  19. Step 20
    Changing Control Arm on TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 4WD (ZSA30_) 2008 by yourself
    Install a new arm.
    Replacement: rear suspension lower control arm – Toyota RAV4 III. Tip from AUTODOC:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA RAV4 III Off-Road (XA30) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) Control Arm replacement - online guide
Tips & tricks for your TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_)
View more
  • How to change Control arm on TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.2 D (ALA35_) - replacement tricks
    How to check your head gasket | AUTODOC
  • Changing Wishbone Toyota RAV4 III 2.2 D 4WD (ALA30_) - Replacement Tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips
  • Maintenance Hacks - TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.0 4WD (ACA30_) Control arms replacement guide
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Replace Trailing arm on Toyota RAV4 III - free video tips
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips