Important!

This replacement procedure can be used for:
FIAT GRANDE PUNTO (199) 1.3 D Multijet, FIAT GRANDE PUNTO (199) 1.3 D Multijet, FIAT GRANDE PUNTO (199) 1.3 D Multijet (199.AXD11, 199.AXD1A, 199.AXD1B,..., FIAT GRANDE PUNTO (199) 1.3 D Multijet … View more

The steps may slightly vary depending on the car design.

How to change front springs / front coil springs on FIAT PUNTO 199 [TUTORIAL AUTODOC]

All the parts you need to replace – Springs for GRANDE PUNTO (199) and other FIAT models

Coil spring

Coil spring buffer

        Coil spring for FIAT GRANDE PUNTO (199) 1.3 D Multijet Diesel (69 hp)
      
        Coil spring for FIAT GRANDE PUNTO (199) 1.3 D Multijet Diesel (84 hp)
      
        Coil spring for FIAT GRANDE PUNTO (199) 1.3 D Multijet Diesel (75 hp)
      
        Coil spring for FIAT GRANDE PUNTO (199) 1.3 D Multijet (199.AXD11, 199.AXD1A, 199.AXD1B,... Diesel (90 hp)

Replacement: coil springs – Fiat Punto 199. List of the tools you'll need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner
                      
                        Copper grease
                      
                        Combination spanner #18
                      
                        Drive socket # 15
                      
                        Drive socket # 17
                      
                        Drive socket # 18
                      
                        HEX bit no.H6.
                      
                        HEX bit no.H8.
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Clip removal tool
                      
                        Phillips screwdriver
                      
                        Round-nose pliers
                      
                        Hydraulic strut spring compressor
                      
                        Hydraulic transmission jack
                      
                        Fender cover
                      
                        Wheel chock

Buy tools

Replacement: coil springs – Fiat Punto 199. Tip from AUTODOC experts:

Both coil springs of the front suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right coil springs of the front suspension.
All work should be done with the engine stopped.

Replacement: coil springs – Fiat Punto 199. Use the following procedure:

Step 1

Open the bonnet.
Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3

Remove the clips of the plastic cowl grille. Use a clip removal tool.
Step 4

Unscrew the fasteners of the cowl grille. Use a Phillips screwdriver.
Step 5

Remove the cowl grille seal.
Step 6

Raise the wiper plastic cowl grille.
Step 7

Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
Step 8

Loosen the upper fastener of the shock strut mount. Use a combination spanner #18. Use HEX No.H6. Use a ratchet wrench.
Step 9

Secure the wheels with chocks.
Step 10

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 11

Raise the front of the car and secure on supports.
Step 12

Unscrew the wheel bolts.

Replacement: coil springs – Fiat Punto 199. Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 13

Remove the wheel.
Step 14

Disconnect the wiring and the brake hose from the bracket on the shock strut. Use round-nose pliers.
Step 15

Clean the stabiliser link fasteners. Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 16

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 17

Remove the stabilizer rod.
Step 18

Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
Step 19

Prop up the steering knuckle. Use a hydraulic transmission jack.
Step 20

Remove the fastening bolts.
Step 21

Disconnect the steering knuckle from the shock absorber strut.
Step 22

Unscrew the top fastening of the shock strut mount.

AUTODOC recommends:
Important! Hold the suspension strut while unscrewing the fastening bolts. Fiat Punto 199
Step 23

Remove the suspension strut.
Step 24

Set the shock absorber strut on the spring compressor tool.

Replacement: coil springs – Fiat Punto 199. Tip from AUTODOC experts:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 25

Compress the spring.
Step 26

Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
Step 27

Remove the strut piston rod nut. Use HEX No.H6. Use a drive socket #18. Use a ratchet wrench.
Step 28

Remove the top strut mount.
Step 29

Release the coil spring.
Step 30

Remove the shock absorber dust cap and the bump stop.

AUTODOC recommends:
Replacement: coil springs – Fiat Punto 199. Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
Step 31

Remove the spring.
Step 32

Install the spring on the shock absorber.
Step 33

Compress the spring.
Step 34

Install the boot and a bump stop onto the shock absorber.
Step 35

Install the upper strut mount and the strut mount bearing.
Step 36

Tighten the shock strut piston rod nut. Use HEX No.H8. Use a drive socket #17. Use a torque wrench. Tighten it to 44 Nm torque.

Replacement: coil springs – Fiat Punto 199. Professionals recommend:
Check to make sure the spring is positioned correctly. Avoid its misalignment.
Step 37

Decompress the spring.
Step 38

Treat the shock strut rod. Use copper grease.
Step 39

Remove the assembled shock strut.
Step 40

Install the shock strut into the wheel arch.
Step 41

Screw the top fastening of the shock strut mount. Do not tighten it.

Replacement: coil springs – Fiat Punto 199. AUTODOC recommends:
To avoid injuries, hold the shock strut when screwing the fastening bolts in.
Step 42

Treat the shock strut mounting seat on the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 43

Fix the shock absorber strut on the steering knuckle.
Step 44

Install the fastening bolts.
Step 45

Screw in the fastener that connects the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
Step 46

Remove the support from under the steering knuckle.

AUTODOC recommends:
Replacement: coil springs – Fiat Punto 199. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 47

Connect the fastener of the ABS sensor cable to the shock absorber strut. Fasten the brake hose on the strut. Use round-nose pliers.
Step 48

Tighten the lower fasteners connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a torque wrench. Tighten it to 105 Nm torque.+45°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 49

Ιnstall the transverse stabilizer link.
Step 50

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a torque wrench. Tighten it to 50 Nm torque.
Step 51

Treat the shock strut fasteners. Use copper grease.
Step 52

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 53

Clean the brake disk surface. Use a brake cleaner.

Replacement: coil springs – Fiat Punto 199. AUTODOC experts recommend:
After applying the spray, wait a few minutes.
Step 54

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. Fiat Punto 199
Step 55

Screw in the wheel bolts. Use wheel impact socket #17.
Step 56

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 57

Remove the jacks and chocks.
Step 58

Tighten the upper fastener of the shock absorber strut mount. Use a combination spanner #18. Use a drive socket #18. Use a torque wrench. Tighten it to 52 nm torque.
Step 59

Treat the fasteners of the shock strut mount. Use copper grease.
Step 60

Install and secure the cowl grille.
Step 61

Tighten the fasteners of the cowl grille. Use a Phillips screwdriver.
Step 62

Install the fasteners of the wiper plastic cowl grille.
Step 63

Install the cowl grille seal.
Step 64

Remove the fender protection cover.
Step 65

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front suspension strut on Fiat Punto 199 – replacement guide

Free download PDF
3.52 MB
How to change rear shock absorbers on Fiat Punto 199 – replacement guide

Free download PDF
2.25 MB
How to change front brake pads on Fiat Punto 199 – replacement guide

Free download PDF
1.7 MB
How to change front brake discs on Fiat Punto 199 – replacement guide

Free download PDF
2.19 MB
How to change rear wheel bearing on FIAT GRANDE PUNTO (199) – replacement guide

Free download PDF
2.44 MB
How to change serpentine belt on Fiat Punto 199 – replacement guide

Free download PDF
1.82 MB

How to change coil springs on a car – replacement tutorial

Universal

Free download PDF
1.91 MB
How to change front coil springs on Fiat Panda 169 – replacement guide

Free download PDF
3.24 MB
How to change front coil springs on Fiat Doblo Cargo – replacement guide

Free download PDF
4.01 MB
How to change front coil springs on Fiat Punto 188 – replacement guide

Free download PDF
2.83 MB
How to change rear coil springs on Fiat Bravo 2 – replacement guide

Free download PDF
1.86 MB
How to change front coil springs on Fiat Bravo 2 – replacement guide

Free download PDF
3.56 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Top 6 products for enhancing your car | AUTODOC tips

3K views

Published on: 18/11/2021
DIY alternator repair | AUTODOC tips

1M views

Published on: 30/11/2022
DIY starter repair | AUTODOC tips

39K views

Published on: 31/08/2023
Petrol or diesel? What's the difference between these engines? | AUTODOC

4K views

Published on: 04/05/2021