Important!
This replacement procedure can be used for:
HYUNDAI SANTA FÉ II (CM) 2.2 CRDi, HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 4x4, HYUNDAI SANTA FÉ II (CM) 2.2 CRDi GLS, HYUNDAI SANTA FÉ II (CM) 2.2 CRDi GLS 4x4, HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 4x4, HYUNDAI SANTA FÉ II (CM) 2.7 4x4, HYUNDAI SANTA FÉ II (CM) 2.7, HYUNDAI SANTA FÉ II (CM) 2.7 V6 GLS, HYUNDAI SANTA FÉ II (CM) 2.7 V6 GLS 4x4, HYUNDAI SANTA FÉ II (CM) 2.7 4x4, HYUNDAI SANTA FÉ II (CM) 2.0 CRDi 4x4 View more

The steps may slightly vary depending on the car design.

How to change front shock absorbers on HYUNDAI SANTA FÉ CM TUTORIAL | AUTODOC

video
All the parts you need to replace – Shock Absorber for SANTA FÉ II (CM) and other HYUNDAI models
How to change Shock absorber on Hyundai Santa Fe cm 2.2 CRDi 4x4 – step-by-step instructions for straightforward car repair Shock absorber
How to change Suspension Strut on Hyundai Santa Fe cm 2.2 CRDi 4x4 – step-by-step instructions for straightforward car repair Suspension Strut
Tools
Replacement: suspension strut – Hyundai Santa Fe CM. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #19
Drive socket # 14
Drive socket # 17
Drive socket # 19
Wheel impact socket #21
Ratchet wrench
Hydraulic strut spring compressor
Fender cover
Wheel chock
Replacement: suspension strut – Hyundai Santa Fe CM. AUTODOC experts recommend:
  • Both shock struts of the front suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock struts of the front suspension.
  • Please note: all work on the car – Hyundai Santa Fe CM – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Shock Absorber on Hyundai Santa Fe cm 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 4x4 2006 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Hyundai Santa Fe cm 2.2 CRDi GLS 4x4 2007 Shock Absorber replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 4
    Changing Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2.7 V6 GLS 4x4 2008 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Hyundai Santa Fe CM
  5. Step 5
    How to remove HYUNDAI SANTA FE 2.2 CRDi GLS 2009 Shock Absorber - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2010: download PDF manuals and video instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 7
    How hard is it to do yourself: Shock Absorber replacement on Hyundai Santa Fe cm 2.4 4x4 2011 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
  8. Step 8
    Remove the stabilizer rod.
    Step 9
    Need to know how to renew Shock Absorber on HYUNDAI SANTA FE 2012? This free workshop manual will help you to do it yourself
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  9. Step 10.1
    Changing of Shock Absorber on Hyundai Santa Fe cm 2005 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fasteners connecting the suspension strut to the steering knuckle.
    Step 10.2
    HYUNDAI SANTA FE 2.2 CRDi GLS 4x4 Shock Absorber replacement: online guides and video tutorials
    Use a combination spanner #19. Use a drive socket #17. Use a ratchet wrench.
  10. Step 11
    Replacing Shock Absorber on Hyundai Santa Fe cm 2007 2.2 CRDi 4x4 by yourself
    Disconnect the ABS sensor wiring.
  11. Step 12
    SANTA FÉ II (CM) 2.2 CRDi GLS 2008 Shock Absorber DIY replacement workshop manual
    Remove the fastening bolts.
  12. Step 13
    How to change Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2009 - tips and tricks
    Disconnect the steering knuckle from the shock absorber strut.
  13. Step 14
    Step-by-step recommendations for DIY replacement Hyundai Santa Fe cm 2010 2.2 CRDi GLS Shock Absorber
    Lower the car.
  14. Step 15
    DIY replacement of Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 2011 is not an issue anymore with our step-by-step tutorial
    Open the hood.
  15. Step 16
    How to change Shock Absorber on Hyundai Santa Fe cm 2005 - free PDF and video manuals
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  16. Step 17
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
    Step 18
    How to replace HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 4x4 2006 Shock Absorber - step-by-step manuals and video guides
    Unscrew the upper fasteners of the shock strut. Use a drive socket #14. Use a ratchet wrench.
    AUTODOC recommends:
    Hyundai Santa Fe CM – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
  17. Step 19
    Hyundai Santa Fe cm 2.2 CRDi GLS 4x4 2007 Shock Absorber replacement: free workshop manuals
    Remove the suspension strut.
  18. Step 20
    Changing Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2.7 V6 GLS 4x4 2008 by yourself
    Set the shock absorber strut on the spring compressor tool.
    Replacement: suspension strut – Hyundai Santa Fe CM. Tip from AUTODOC experts:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  19. Step 21
    How to remove HYUNDAI SANTA FE 2.2 CRDi GLS 2009 Shock Absorber - online easy-to-follow instructions
    Compress the spring.
  20. Step 22
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
    Step 23
    How to replace Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2010: download PDF manuals and video instructions
    Remove the strut piston rod nut. Use a drive socket #19. Use a ratchet wrench.
  21. Step 24
    How hard is it to do yourself: Shock Absorber replacement on Hyundai Santa Fe cm 2.4 4x4 2011 - download illustrated guide
    Remove the top strut mount.
  22. Step 25
    Need to know how to renew Shock Absorber on HYUNDAI SANTA FE 2012? This free workshop manual will help you to do it yourself
    Release the coil spring.
  23. Step 26
    Changing of Shock Absorber on Hyundai Santa Fe cm 2005 won't be an issue if you follow this illustrated step-by-step guide
    Remove the spring.
  24. Step 27
    HYUNDAI SANTA FE 2.2 CRDi GLS 4x4 Shock Absorber replacement: online guides and video tutorials
    Remove the shock absorber dust cap and the bump stop.
    AUTODOC recommends:
    Replacement: suspension strut – Hyundai Santa Fe CM. Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
  25. Step 28
    Replacing Shock Absorber on Hyundai Santa Fe cm 2007 2.2 CRDi 4x4 by yourself
    Remove the old shock absorber from the hydraulic coil spring compressor.
    Replacement: suspension strut – Hyundai Santa Fe CM. Tip from AUTODOC experts:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  26. Step 29
    SANTA FÉ II (CM) 2.2 CRDi GLS 2008 Shock Absorber DIY replacement workshop manual
    Install the new shock absorber on the hydraulic coil spring compressor.
  27. Step 30
    How to change Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2009 - tips and tricks
    Install the dust sleeve and the bump stop on the new shock absorber.
  28. Step 31
    Step-by-step recommendations for DIY replacement Hyundai Santa Fe cm 2010 2.2 CRDi GLS Shock Absorber
    Install the spring.
  29. Step 32
    DIY replacement of Shock Absorber on HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 2011 is not an issue anymore with our step-by-step tutorial
    Compress the spring.
  30. Step 33
    How to change Shock Absorber on Hyundai Santa Fe cm 2005 - free PDF and video manuals
    Install the upper strut mount and the strut mount bearing.
  31. Step 34
    How to replace HYUNDAI SANTA FÉ II (CM) 2.2 CRDi 4x4 2006 Shock Absorber - step-by-step manuals and video guides
    Tighten the shock strut piston rod nut. Use a drive socket #19. Use a torque wrench. Tighten it to 64 Nm torque.
    Replacement: suspension strut – Hyundai Santa Fe CM. AUTODOC experts recommend:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HYUNDAI SANTA FÉ II (CM) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HYUNDAI SANTA FÉ II (CM) Shock Absorber replacement - online guide
Tips & tricks for your HYUNDAI SANTA FÉ II (CM)
View more
  • How to change Shocks on HYUNDAI SANTA FÉ II (CM) 2.2 CRDi - replacement tricks
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Changing Shock absorbers Hyundai Santa Fe cm 2.2 CRDi 4x4 - Replacement Tips
    What causes engine misfire? | AUTODOC
  • Maintenance Hacks - HYUNDAI SANTA FÉ II (CM) 2.2 CRDi GLS 4x4 Struts replacement guide
    DIY valve cover restoration | AUTODOC tips
  • Replace Struts and shocks on Hyundai Santa Fe cm - free video tips
    3 things to know before buying summer tyres | AUTODOC tips