Disclaimer
How to change rear anti roll bar bushes on VW Sharan 1 – replacement guide
downloads:
2
Views:
20
Important!
This replacement procedure can be used for:
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6 Syncro, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6 Syncro, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
How to change rear Stabilizer bushes on VW SHARAN 7M TUTORIAL | AUTODOC
All the parts you need to replace – Anti Roll Bar Bushes for SHARAN (7M8, 7M9, 7M6) and other VW models
Anti roll bar bush
Anti roll bar bush
Anti roll bar bush for Sharan I (7M8, 7M9, 7M6) Diesel (136 hp)
Anti roll bar bush for Sharan I (7M8, 7M9, 7M6) Petrol (204 hp)
Anti roll bar bush for Sharan I (7M8, 7M9, 7M6) Petrol (204 hp)
Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Ratchet wrench
Torque wrench
Flat Screwdriver
Water pump pliers
Hydraulic transmission jack
Replacement: anti roll bar bushes – VW Sharan 1. Tip from AUTODOC:
- Both stabilizer bushes should be replaced simultaneously.
- The replacement procedure is identical for the right and left stabilizer bushes.
- All work should be done with the engine stopped.
Replacement: anti roll bar bushes – VW Sharan 1. Recommended sequence of steps:
- Step 1
Lift the car using a jack or place it over an inspection pit. - Step 2
Clean the fasteners of the stabilizer bush brackets. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fasteners of the stabilizer bush brackets. Use a drive socket #13. Use a ratchet wrench. - Step 4
Remove the stabilizer bush brackets. Use a flat screwdriver. - Step 5
Secure the rear axle beam. Use a hydraulic transmission jack. - Step 6
Remove the stabilizer bushes. Use a flat screwdriver. Use water pump pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VW Sharan I (7M8, 7M9, 7M6) model.
Popular maintenance tutorials for VW Sharan 1
Free download PDF
3.99 MB
Free download PDF2.7 MB
Free download PDF1.94 MB
Free download PDF1.44 MB
Free download PDF1.32 MB
Free download PDF1.5 MB
Complete guides for changing the Stabilizer bushes on different VW SHARAN models
Free download PDF593.92 KB
Free download PDF2 MB
Free download PDF1.64 MB
Free download PDF1.62 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your VW SHARAN (7M8, 7M9, 7M6)
View more
8 bad driving habits | AUTODOC tips
How to unlock your car without a key | AUTODOC tips
Top 5 reasons why your car squeals | AUTODOC Tips
3 things that cause engine damage | AUTODOC tips
