Important!
This replacement procedure can be used for:
PEUGEOT 107 Hatchback (PM_, PN_) 1.0

The steps may slightly vary depending on the car design.

How to replace front anti roll bar link on PEUGEOT 107 1 (PM, PN) [TUTORIAL AUTODOC]

Required tools:
Required tools:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #10
Combination spanner #13
Combination spanner #19
Drive socket # 12
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Ball joint puller
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on Peugeot 107 PM PN in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Anti Roll Bar Links on PEUGEOT 107 2005 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2006 Anti Roll Bar Links - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. PEUGEOT 107 1.4 HDi 2007 Anti Roll Bar Links replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
  4. Changing Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi 2008 by yourself
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. How to remove PEUGEOT 107 1.0 2009 Anti Roll Bar Links - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 2010: download PDF manuals and video instructions
    Step 6
    Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
  7. How hard is it to do yourself: Anti Roll Bar Links replacement on PEUGEOT 107 1.0 2011 - download illustrated guide
    Step 7
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #10.Use a drive socket #12.Use a ratchet wrench.
  8. Need to know how to renew Anti Roll Bar Links on PEUGEOT 107 ? This free workshop manual will help you to do it yourself
    Step 8
    Remove the cotter pin.Use a crowbar.
  9. Changing of Anti Roll Bar Links on PEUGEOT 107 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Clean the fastener connecting the ball joint to the steering knuckle.Use a wire brush.Use WD-40 spray.
  10. PEUGEOT 107 1.0 Anti Roll Bar Links replacement: online guides and video tutorials
    Step 10
    Unscrew the ball joint fastening to the steering knuckle.Use a combination spanner #19.
  11. Replacing Anti Roll Bar Links on PEUGEOT 107 2005 1.0 by yourself
    Step 11
    Disconnect the ball joint from the steering knuckleUse a ball joint puller.
  12. 107 Hatchback (PM_, PN_) 1.0 2006 Anti Roll Bar Links DIY replacement workshop manual
    Step 12
    Disconnect the lower arm from the steering knuckle.
  13. How to change Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 2007 - tips and tricks
    Step 13
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar.Use a combination spanner #10.Use a drive socket #12.Use a ratchet wrench.
  14. Step-by-step recommendations for DIY replacement PEUGEOT 107 2008 1.0 Anti Roll Bar Links
    Step 14
    Remove the stabilizer rod.Use a crowbar.
    AUTODOC recommends:
    Examine stabiliser bushes. Replace them if needed.
  15. DIY replacement of Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2009 is not an issue anymore with our step-by-step tutorial
    Step 15
    Clean all joints of the arm.Use a wire brush.Use WD-40 spray.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  16. How to change Anti Roll Bar Links on PEUGEOT 107 2005 - free PDF and video manuals
    Step 16
    Connect the lower arm to the steering knuckle.
  17. How to replace PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2006 Anti Roll Bar Links - step-by-step manuals and video guides
    Step 17
    Connect the ball joint to the steering knuckle
    Step 18
    Install a new rod, tighten the fasteners.
  18. PEUGEOT 107 1.4 HDi 2007 Anti Roll Bar Links replacement: free workshop manuals
    Step 19
    Use a combination spanner #13.Use a drive socket #12.Use a ratchet wrench.
  19. Changing Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi 2008 by yourself
    Step 20
    Support the arm. Use a hydraulic transmission jack.
  20. How to remove PEUGEOT 107 1.0 2009 Anti Roll Bar Links - online easy-to-follow instructions
    Step 21
    Tighten the ball joint fastener. Use a combination spanner #19.Use a torque wrench.Tighten it to 50 nm torque.
  21. How to replace Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 2010: download PDF manuals and video instructions
    Step 22
    Install the cotter pin.Use a crowbar.
  22. How hard is it to do yourself: Anti Roll Bar Links replacement on PEUGEOT 107 1.0 2011 - download illustrated guide
    Step 23
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #13.Use a drive socket #12.Use a torque wrench.Tighten it to 35 Nm torque.
  23. Need to know how to renew Anti Roll Bar Links on PEUGEOT 107 ? This free workshop manual will help you to do it yourself
    Step 24
    Remove the support from under the arm.
    AUTODOC recommends:
    Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
  24. Changing of Anti Roll Bar Links on PEUGEOT 107 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 25
    Tighten the fastener connecting the stabilizer link to the stabilizer bar.Use a combination spanner #13.Use a drive socket #12.Use a torque wrench.Tighten it to 35 Nm torque.
    Step 26
    Treat all joints of the stabiliser link.Use copper grease.
  25. PEUGEOT 107 1.0 Anti Roll Bar Links replacement: online guides and video tutorials
    Step 27
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  26. Replacing Anti Roll Bar Links on PEUGEOT 107 2005 1.0 by yourself
    Step 28
    Clean the wheel rim mounting seat. Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  27. 107 Hatchback (PM_, PN_) 1.0 2006 Anti Roll Bar Links DIY replacement workshop manual
    Step 29
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  28. How to change Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 2007 - tips and tricks
    Step 30
    Screw in the wheel bolts.Use wheel impact socket #17.
  29. Step-by-step recommendations for DIY replacement PEUGEOT 107 2008 1.0 Anti Roll Bar Links
    Step 31
    Lower the car and working in a cross order, tighten the wheel bolts.Use wheel impact socket #17.Use a torque wrench.Tighten it to 120 nm torque.
  30. DIY replacement of Anti Roll Bar Links on PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2009 is not an issue anymore with our step-by-step tutorial
    Step 32
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Vehicle maintenance log book
Know what, when and how to repair, and manage your car expenses
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
PEUGEOT 107 Hatchback (PM_, PN_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 107 Hatchback (PM_, PN_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your PEUGEOT 107 Hatchback (PM_, PN_)
View more
  • How to change Sway bar links on PEUGEOT 107 Hatchback (PM_, PN_) 1.0 - replacement tricks
    5 Signs of Brake Pad Wear | AUTODOC
  • Changing Stabiliser link PEUGEOT 107 1.0 - Replacement Tips
    Top 5 Christmas gifts for car lovers | AUTODOC
  • Maintenance Hacks - PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi Drop links replacement guide
    What our tutorials might look like if filmed by famous directors | AUTODOC
  • Replace Stabilizer bar link on PEUGEOT 107 - free video tips
    Symptoms and causes of engine misfiring | How to prevent engine misfire | Tips from AUTODOC

Manuals for PEUGEOT models