Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.6 D Multijet

The steps may slightly vary depending on the car design.

How to replace front anti roll bar link / front drop link on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]

Required tools:
Required tools:
Wire brush
WD-40 spray
Copper grease
HEX bit No.H5.
Combination spanner #17
Drive socket # 10
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Phillips Screwdriver
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on FIAT BRAVO II (198) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Anti Roll Bar Links on FIAT BRAVO II (198) 2006 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace FIAT BRAVO II (198) 1.9 D Multijet 2007 Anti Roll Bar Links - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. FIAT BRAVO II (198) 1.6 D Multijet 2008 Anti Roll Bar Links replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
  4. Changing Anti Roll Bar Links on FIAT BRAVO II (198) 1.4 T-Jet 2009 by yourself
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. How to remove FIAT BRAVA 1.4 LPG 2010 Anti Roll Bar Links - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Anti Roll Bar Links on FIAT BRAVO II (198) 2011: download PDF manuals and video instructions
    Step 6
    Chock the opposite wheel. Use a hydraulic transmission jack.
  7. How hard is it to do yourself: Anti Roll Bar Links replacement on FIAT BRAVO II (198) 1.9 D Multijet 2012 - download illustrated guide
    Step 7
    Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
  8. Need to know how to renew Anti Roll Bar Links on FIAT BRAVA ? This free workshop manual will help you to do it yourself
    Step 8
    Unscrew the fastener connecting the stabilizer link to the shock strut.Use a drive socket #17.Use a ratchet wrench.
  9. Changing of Anti Roll Bar Links on FIAT BRAVO II (198) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Unscrew and remove the wheel arch cover fasteners.Use a drive socket #10.Use a ratchet wrench.Use a Phillips screwdriver.
  10. FIAT BRAVA 1.4 Anti Roll Bar Links replacement: online guides and video tutorials
    Step 10
    Remove the wheel arch cover.
  11. Replacing Anti Roll Bar Links on FIAT BRAVO II (198) 2016 1.9 D Multijet by yourself
    Step 11
    Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
  12. BRAVO II (198) 1.4 LPG 2017 Anti Roll Bar Links DIY replacement workshop manual
    Step 12
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar.Use HEX No.H5.Use a combination spanner #17.Use a ratchet wrench.
  13. How to change Anti Roll Bar Links on FIAT BRAVO II (198) 2018 - tips and tricks
    Step 13
    Remove the stabilizer rod.
    AUTODOC recommends:
    Examine stabiliser bushes. Replace them if needed.
  14. Step-by-step recommendations for DIY replacement FIAT BRAVO II (198) 2019 1.4 LPG Anti Roll Bar Links
    Step 14
    Install a new rod, tighten the fasteners.
  15. DIY replacement of Anti Roll Bar Links on FIAT BRAVO II (198) 1.4 2020 is not an issue anymore with our step-by-step tutorial
    Step 15
    Tighten the fastener connecting the stabilizer link to the stabilizer bar.Use a combination spanner #17.Use HEX No.H5.Use a torque wrench.Tighten it to 55 Nm torque.
  16. How to change Anti Roll Bar Links on FIAT BRAVO II (198) 2006 - free PDF and video manuals
    Step 16
    Remove the hydraulic transmission jack.
    AUTODOC recommends:
    Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
  17. How to replace FIAT BRAVO II (198) 1.9 D Multijet 2007 Anti Roll Bar Links - step-by-step manuals and video guides
    Step 17
    Tighten the fastener connecting the stabilizer link to the shock strut.Use a combination spanner #17.Use HEX No.H5.Use a torque wrench.Tighten it to 55 Nm torque.
  18. FIAT BRAVO II (198) 1.6 D Multijet 2008 Anti Roll Bar Links replacement: free workshop manuals
    Step 18
    Install the wheel arch cover to its mounting seat.
  19. Changing Anti Roll Bar Links on FIAT BRAVO II (198) 1.4 T-Jet 2009 by yourself
    Step 19
    Install and tighten the wheel arch cover fasteners.Use a drive socket #10.Use a ratchet wrench.Use a Phillips screwdriver.
  20. How to remove FIAT BRAVA 1.4 LPG 2010 Anti Roll Bar Links - online easy-to-follow instructions
    Step 20
    Clean the wheel rim mounting seat. Use a wire brush.Treat the contacting surface.Use copper grease.
    Step 21
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  21. How to replace Anti Roll Bar Links on FIAT BRAVO II (198) 2011: download PDF manuals and video instructions
    Step 22
    Screw in the wheel bolts.Use wheel impact socket #17.
  22. How hard is it to do yourself: Anti Roll Bar Links replacement on FIAT BRAVO II (198) 1.9 D Multijet 2012 - download illustrated guide
    Step 23
    Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 110 Nm torque.
  23. Need to know how to renew Anti Roll Bar Links on FIAT BRAVA ? This free workshop manual will help you to do it yourself
    Step 24
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Vehicle maintenance log book
Know what, when and how to repair, and manage your car expenses
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
FIAT BRAVO II (198) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT BRAVO II (198) Anti Roll Bar Links replacement - online guide
Tips & tricks for your FIAT BRAVO II (198)
View more
  • How to change Sway bar links on FIAT BRAVO II (198) 1.4 - replacement tricks
    How to choose the right dash cam for your car | AUTODOC
  • Changing Stabiliser link FIAT BRAVO II (198) 1.9 D Multijet - Replacement Tips
    What to do if your check engine light is on | Tips from AUTODOC
  • Maintenance Hacks - FIAT BRAVO II (198) 1.6 D Multijet Drop links replacement guide
    Basic rules for driving all types of transmissions | AUTODOC
  • Replace Stabilizer bar link on FIAT BRAVO II (198) - free video tips
    Types and features of run-flat tyres | AUTODOC