Important!
This replacement procedure can be used for:
TOYOTA AYGO (WNB1_, KGB1_) 1.0 GPL (KGB10_), TOYOTA AYGO (WNB1_, KGB1_) 1.4 D-4D (WNB10_) View more

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on TOYOTA AYGO 1 (AB10) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Track Rod End for AYGO (WNB1_, KGB1_) and other TOYOTA models
How to change Track rod end on Toyota Aygo AB10 1.0 (KGB10_) – step-by-step instructions for straightforward car repair
Track rod end
How to change Rod Assembly on Toyota Aygo AB10 1.0 (KGB10_) – step-by-step instructions for straightforward car repair
Rod Assembly
How to change Repair Kit, tie rod on Toyota Aygo AB10 1.0 (KGB10_) – step-by-step instructions for straightforward car repair
Repair Kit, tie rod
How to change Mounting Kit, tie rod end on Toyota Aygo AB10 1.0 (KGB10_) – step-by-step instructions for straightforward car repair
Mounting Kit, tie rod end
Tools
Replacement: track rod end – Toyota Aygo AB1. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Wheel impact socket #19
Torque wrench
Nippers
Tap wrench
Vernier caliper
Crow bar
Ball joint puller
Wheel chock
Replacement: track rod end – Toyota Aygo AB1. AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • Warning! Shut down the engine before starting any work – Toyota Aygo AB1.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on Toyota Aygo AB10 2005 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    How to replace TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_) 2006 Track Rod End - step-by-step manuals and video guides
    Raise the front of the car and secure on supports.
  3. Step 4
    Toyota Aygo AB10 1.4 D-4D (WNB10_) 2007 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – Toyota Aygo AB1. Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_) 2008 by yourself
    Remove the wheel.
  5. Step 6
    How to remove TOYOTA AYGO 1.4 D-4D (WNB10_) 2009 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on TOYOTA AYGO (WNB1_, KGB1_) 2010: download PDF manuals and video instructions
    Remove the cotter pin fixing the tie rod end fastening. Use nippers. Use a crowbar.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Toyota Aygo AB10 1.0 (KGB10_) 2011 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  8. Step 9
    Need to know how to renew Track Rod End on TOYOTA AYGO 2012? This free workshop manual will help you to do it yourself
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  9. Step 10
    Changing of Track Rod End on Toyota Aygo AB10 2013 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #17.
  10. Step 11
    TOYOTA AYGO 1.0 GPL (KGB10_) Track Rod End replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  11. Step 12
    Replacing Track Rod End on Toyota Aygo AB10 2005 1.0 (KGB10_) by yourself
    Screw the end out of the tie rod.
  12. Step 13
    AYGO (WNB1_, KGB1_) 1.4 D-4D (WNB10_) 2006 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on TOYOTA AYGO (WNB1_, KGB1_) 2007 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – Toyota Aygo AB1. AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements
  14. Step 15
    Step-by-step recommendations for DIY replacement Toyota Aygo AB10 2008 1.4 D-4D (WNB10_) Track Rod End
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  15. Step 16
    DIY replacement of Track Rod End on TOYOTA AYGO (WNB1_, KGB1_) 1.0 GPL (KGB10_) 2009 is not an issue anymore with our step-by-step tutorial
    Treat the fastener connecting the tie rod end to the steering knuckle. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
TOYOTA AYGO (WNB1_, KGB1_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY TOYOTA AYGO (WNB1_, KGB1_) Track Rod End replacement - online guide
Tips & tricks for your TOYOTA AYGO (WNB1_, KGB1_)
View more
  • How to change Tie rod end on TOYOTA AYGO (WNB1_, KGB1_) 1.0 GPL (KGB10_) - replacement tricks
    The most common problems when buying a used car | AUTODOC
  • Changing Outer tie rod Toyota Aygo AB10 1.0 (KGB10_) - Replacement Tips
    8 bad driving habits | AUTODOC tips
  • Maintenance Hacks - TOYOTA AYGO (WNB1_, KGB1_) 1.4 D-4D (WNB10_) Track rod end ball joint replacement guide
    5 car interior cleaning mistakes | AUTODOC tips
  • Replace Outer tie rod end on Toyota Aygo AB10 - free video tips
    How to remove rust | AUTODOC tips