Disclaimer
How to change track rod end on Toyota Auris E15 – replacement guide
downloads:
12
Views:
141
Important!
This replacement procedure can be used for:
TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 2.2 D (ADE157_, ADE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 2.0 D-4D (ADE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.4 D-4D (NDE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.6 (ZRE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.4 (ZZE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.33 Dual-VVTi (NRE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.6 (ZRE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.33 Dual-VVTi (NRE150_) … View more
The steps may slightly vary depending on the car design.
TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 2.2 D (ADE157_, ADE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 2.0 D-4D (ADE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.4 D-4D (NDE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.6 (ZRE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.4 (ZZE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.33 Dual-VVTi (NRE150_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.6 (ZRE151_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.8 (ZRE152_), TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) 1.33 Dual-VVTi (NRE150_) … View more
The steps may slightly vary depending on the car design.
How to change tie rod end / track rod end on TOYOTA AURIS (E150) [TUTORIAL AUTODOC]
All the parts you need to replace – Track Rod End for AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_) and other TOYOTA models
Track rod end
Track rod end
Track rod end for Auris Hatchback (E15) Petrol (136 hp)
Track rod end for Auris Hatchback (E15) Petrol (101 hp)
Track rod end for Auris Hatchback (E15) Petrol (132 hp)
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
Combination spanner #19
Drive socket # 17
Drive socket # 19
Wheel impact socket #21
Torque wrench
Tap wrench
Nippers
Vernier caliper
Crow bar
Ball joint puller
Wheel chock
Replacement: track rod end – Toyota Auris E15. AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- All work should be done with the engine stopped.
Replacement: track rod end – Toyota Auris E15. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.Replacement: track rod end – Toyota Auris E15. Tip from AUTODOC:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the cotter pin. Use a crowbar. Use nippers. - Step 7
Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench. - Step 9
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper. - Step 10
Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19. - Step 11
Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. - Step 12
Screw the end out of the tie rod. - Step 13
Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray. - Step 14
Screw on a new tie rod end. Use a combination spanner #19.Replacement: track rod end – Toyota Auris E15. Tip from AUTODOC experts:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements. - Step 15
Screw on the tie rod end jam nut. Use a combination spanner #19. - Step 16
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Auris Hatchback (E15) model.
Popular maintenance tutorials for Toyota Auris E15
Free download PDF
2.79 MB
Free download PDF2.26 MB
Free download PDF1.22 MB
Free download PDF1.53 MB
Free download PDF1.53 MB
Complete guides for changing the Tie rod end on different TOYOTA AURIS models
Free download PDF1.79 MB
Free download PDF1.77 MB
Free download PDF1.31 MB
Free download PDF1.66 MB
Free download PDF1.75 MB
Free download PDF2.31 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your TOYOTA AURIS (NRE15_, ZZE15_, ADE15_, ZRE15_, NDE15_)
View more
8 bad driving habits | AUTODOC tips
DIY jack restoration | AUTODOC tips
How to choose the right engine oil for your car | AUTODOC
5 tools that make car repair incredibly simple | AUTODOC tips
