Important!
This replacement procedure can be used for:
RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M), RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M)

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on RENAULT CLIO 2 (C65) [TUTORIAL AUTODOC]

Replacement: track rod end – Renault Clio 2. Tools you might need:
Replacement: track rod end – Renault Clio 2. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 17
Combination spanner #20
Combination spanner #22
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Hydraulic transmission jack
Wheel chock
All the parts you need to replace – Track Rod End for CLIO II (BB0/1/2_, CB0/1/2_) and other RENAULT models
How to change Rod Assembly on Renault Clio 2 1.2 – step-by-step instructions for straightforward car repair
Rod Assembly
How to change Rod Assembly on RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M) – tips for proper car maintenance
RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M)
Simple DIY car repair steps – Replacing Rod Assembly on RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M)
RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M)
How to change Tie Rod End on Renault Clio 2 1.2 – step-by-step instructions for straightforward car repair
Tie Rod End
How to change Tie Rod End on RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M) – tips for proper car maintenance
RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M)
Simple DIY car repair steps – Replacing Tie Rod End on RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M)
RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M)
Replacement: track rod end – Renault Clio 2. Tip from AUTODOC:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • Please note: all work on the car – Renault Clio 2 – should be done with the engine switched off.
Carry out replacement in the following order:
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT CLIO II (BB0/1/2_, CB0/1/2_) Track Rod End replacement - online guide
Tips & tricks for your RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
View more
  • How to change Tie rod end on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi - replacement tricks
    How to remove a broken bolt without welding | AUTODOC tips
  • Changing Outer tie rod Renault Clio 2 1.2 - Replacement Tips
    Noise from under the hood | AUTODOC TIPS
  • Maintenance Hacks - RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 16V Outer tie rod end replacement guide
    How to fix a knocking and creaking suspension | AUTODOC
  • Replace Track rod end ball joint on Renault Clio 2 - free video tips
    6 SIGNS OF A BAD FUEL FILTER | AUTODOC