Important!
This replacement procedure can be used for:
PEUGEOT 207 SW Box Body / Estate (WK_) 1.6 HDi, PEUGEOT 207 SW Box Body / Estate (WK_) 1.6 HDi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for 207 SW Box Body / Estate (WK_) and other PEUGEOT models
How to change Track rod end on PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi – step-by-step instructions for straightforward car repair Track rod end
How to change Rod Assembly on PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi – step-by-step instructions for straightforward car repair Rod Assembly
How to change Repair Kit, tie rod on PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi – step-by-step instructions for straightforward car repair Repair Kit, tie rod
How to change Mounting Kit, tie rod end on PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi – step-by-step instructions for straightforward car repair Mounting Kit, tie rod end
Tools
Replacement: track rod end – PEUGEOT 207 SW Kasten / Kombi (WK_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Drive socket # 16
Drive socket # 17
Combination spanner #24
Combination spanner #25
Wheel impact socket #17
Ratchet wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – PEUGEOT 207 SW Kasten / Kombi (WK_). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – PEUGEOT 207 SW Kasten / Kombi (WK_). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on PEUGEOT 207 SW Kasten / Kombi (WK_) 2007 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace PEUGEOT 207 SW Box Body / Estate (WK_) 1.6 HDi 2008 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT 207 SW Kasten / Kombi (WK_)
  3. Step 5
    PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi 2009 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on PEUGEOT 207 SW Box Body / Estate (WK_) 1.6 HDi 2010 by yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove PEUGEOT 207 1.6 HDi 2011 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on PEUGEOT 207 SW Box Body / Estate (WK_) 2012: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24 (2 pieces).
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi 2007 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
  8. Step 10
    Need to know how to renew Track Rod End on PEUGEOT 207 2008? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Track Rod End on PEUGEOT 207 SW Kasten / Kombi (WK_) 2009 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    PEUGEOT 207 1.6 HDi Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Track Rod End on PEUGEOT 207 SW Kasten / Kombi (WK_) 2011 1.6 HDi by yourself
    Screw on a new tie rod end.
    Replacement: track rod end – PEUGEOT 207 SW Kasten / Kombi (WK_). Tip from AUTODOC experts:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  12. Step 14
    207 SW Box Body / Estate (WK_) 1.6 HDi 2012 Track Rod End DIY replacement workshop manual
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 207 SW Box Body / Estate (WK_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 207 SW Box Body / Estate (WK_) Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 207 SW Box Body / Estate (WK_)
View more
  • How to change Tie rod end on PEUGEOT 207 SW Box Body / Estate (WK_) 1.6 HDi - replacement tricks
    Replacing your engine cooling fan | AUTODOC tips
  • Changing Outer tie rod PEUGEOT 207 SW Kasten / Kombi (WK_) 1.6 HDi - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 207 SW Box Body / Estate (WK_) 1.6 HDi Track rod end ball joint replacement guide
    DIY jack restoration | AUTODOC tips
  • Replace Outer tie rod end on PEUGEOT 207 SW Kasten / Kombi (WK_) - free video tips
    How to restore wheel rims | AUTODOC tips