
Disclaimer
How to change track rod end on FORD Transit Mk7 Van (V363) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue … View more
The steps may slightly vary depending on the car design.
FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for Transit Mk7 Van (V363, FCD, FDD) and other FORD models
Alternative products

Wire brush
WD-40 spray
An all-purpose cleaning spray
Ceramic grease
Torque wrench
22 mm combination spanner
24 mm combination spanner
25 mm combination spanner
19 mm socket
22 mm socket
21 mm wheel impact socket
Ratchet wrench
Tommy bar
Vernier caliper
Ball joint separator
Wheel chocks
Replacement: track rod end – FORD TRANSIT Custom Box. Tip from AUTODOC:
- Replace the tie rod ends in pairs.
- All the work should be carried out with the ignition switched off.
Replacement: track rod end – FORD TRANSIT Custom Box. Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 3
Raise the car.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands. - Step 4
Unscrew the wheel nuts.Caution!To avoid injury, hold up the wheel when unscrewing the nuts. - Step 5
Remove the wheel. - Step 6
Clean all tie rod end connections. Use a wire brush. Use WD-40 spray. - Step 7
Measure and note down the length of the exposed portion of the tie rod thread or the number of turns the tie rod end made when being unscrewed to prevent wheel misalignment during reassembly. Use a vernier caliper. - Step 8
Loosen the lock nut securing the tie rod end to the tie rod. Use a 22 mm combination spanner. Use a 24 mm combination spanner. - Step 9
Unscrew the nut connecting the tie rod end to the steering knuckle. Use a 22 mm socket. Use a ratchet wrench. - Step 10
Disconnect the tie rod end from the steering knuckle. Use a ball joint separator. - Step 11
Unscrew the tie rod end from the tie rod. - Step 12
Clean the mounting seats of the tie rod end. Use a wire brush. Use an all-purpose cleaning spray. - Step 13
Screw on a new tie rod end.Replacement: track rod end – FORD TRANSIT Custom Box. AUTODOC recommends:When installing the tie rod end, remember to maintain the same length of the exposed tie rod thread or turn the tie rod end the same number of times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk7 Van (V363) model
Popular maintenance tutorials for Ford Transit V363
Complete guides for changing the Tie rod end on different FORD TRANSIT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Transit Mk7 Van (V363, FCD, FDD)
View more
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
Engine Overheating? Replace Your Cooling Fan to Fix It
Most commonly replaced car parts on FORD TRANSIT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






































