Important!
This replacement procedure can be used for:
FIAT Doblo Cargo (223_) 1.3 JTD 16V Multijet, FIAT Doblo Cargo (223_) 1.9 JTD Multijet, FIAT Doblo Cargo (223_) 1.2 (223ZXA1A), FIAT Doblo Cargo (223_) 1.9 D (223ZXB1A), FIAT Doblo Cargo (223_) 1.6 16V (223ZXD1A), FIAT Doblo Cargo (223_) 1.9 JTD (223ZXE1A), FIAT Doblo Cargo (223_) 1.9 JTD, FIAT Doblo Cargo (223_) 1.3 JTD 16V, FIAT Doblo Cargo (223_) 1.4, FIAT Doblo Cargo (223_) 1.6 Natural Power, FIAT Doblo Cargo (223_) 1.6 16V, FIAT Doblo Cargo (223_) 1.6 Natural Power (223WXD1A) View more

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on FIAT DOBLO 1 (223) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Track Rod End for Doblo Cargo (223_) and other FIAT models
Tools
Replacement: track rod end – Fiat Doblo Cargo. List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Combination spanner #22
Wheel impact socket #17
Torque wrench
Tap wrench
Ball joint puller
Vernier caliper
Wheel chock
Replacement: track rod end – Fiat Doblo Cargo. AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • All work should be done with the engine stopped.
Replacement: track rod end – Fiat Doblo Cargo. Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Fiat Doblo Cargo 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT Doblo Cargo (223_) 1.9 JTD 2001 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Fiat Doblo Cargo 1.3 D Multijet 2002 Track Rod End replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Fiat Doblo Cargo
    Step 5
    Changing Track Rod End on FIAT Doblo Cargo (223_) 1.6 Natural Power 2003 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FIAT DOBLO 1.3 JTD 16V 2004 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on FIAT Doblo Cargo (223_) 2005: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Fiat Doblo Cargo 1.2 2006 - download illustrated guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  8. Step 9
    Need to know how to renew Track Rod End on FIAT DOBLO 2007? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  9. Step 10
    Changing of Track Rod End on Fiat Doblo Cargo 2008 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    FIAT DOBLO 1.6 16V Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Fiat Doblo Cargo 2010 1.9 JTD by yourself
    Screw on a new tie rod end.
    Replacement: track rod end – Fiat Doblo Cargo. AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  12. Step 13
    Doblo Cargo (223_) 1.3 JTD 16V 2011 Track Rod End DIY replacement workshop manual
    Clean the mounting seat of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on FIAT Doblo Cargo (223_) 2012 - tips and tricks
    Treat the fastener connecting the tie rod end to the steering knuckle. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Doblo I Cargo (223) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT Doblo Cargo (223_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT Doblo Cargo (223_) Track Rod End replacement - online guide
Tips & tricks for your FIAT Doblo Cargo (223_)
View more
  • How to change Tie rod end on FIAT Doblo Cargo (223_) 1.9 D - replacement tricks
    How to easily repair a punctured tyre | AUTODOC tips
  • Changing Outer tie rod Fiat Doblo Cargo 1.9 JTD - Replacement Tips
    Top 5 brake repair mistakes | AUTODOC tips
  • Maintenance Hacks - FIAT Doblo Cargo (223_) 1.3 D Multijet Track rod end ball joint replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Outer tie rod end on Fiat Doblo Cargo - free video tips
    Coolant comparison test | AUTODOC