Important!
This replacement procedure can be used for:
CITROËN C1 (PM_, PN_) 1.0, CITROËN C1 II (PA_, PS_) 1.0 VTi 68

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on CITROEN C1 (PM, PN) [TUTORIAL AUTODOC]

Replacement: track rod end – Citroen C1 1 PM PN. Tools you need:
Replacement: track rod end – Citroen C1 1 PM PN. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Round-nose pliers
Nippers
Tap wrench
Vernier caliper
Crow bar
Ball joint puller
Wheel chock
All the parts you need to replace – Track Rod End for C1 (PM_, PN_) and other CITROËN models
How to change Repair Kit, tie rod on CITROËN C1 (PM_, PN_) 1.0 – step-by-step instructions for straightforward car repair
Repair Kit, tie rod
How to change Repair Kit, tie rod on CITROËN C1 (PM_, PN_) 1.0 – tips for proper car maintenance
CITROËN C1 (PM_, PN_) 1.0
How to change Rod Assembly on CITROËN C1 (PM_, PN_) 1.0 – step-by-step instructions for straightforward car repair
Rod Assembly
How to change Rod Assembly on CITROËN C1 (PM_, PN_) 1.0 – tips for proper car maintenance
CITROËN C1 (PM_, PN_) 1.0
Simple DIY car repair steps – Replacing Rod Assembly on CITROËN C1 II (PA_, PS_) 1.0 VTi 68
CITROËN C1 II (PA_, PS_) 1.0 VTi 68
How to change Tie Rod End on CITROËN C1 (PM_, PN_) 1.0 – step-by-step instructions for straightforward car repair
Tie Rod End
How to change Tie Rod End on CITROËN C1 (PM_, PN_) 1.0 – tips for proper car maintenance
CITROËN C1 (PM_, PN_) 1.0
Simple DIY car repair steps – Replacing Tie Rod End on CITROËN C1 II (PA_, PS_) 1.0 VTi 68
CITROËN C1 II (PA_, PS_) 1.0 VTi 68
Replacement: track rod end – Citroen C1 1 PM PN. AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – Citroen C1 1 PM PN. Take the following steps:
  1. How to change Track Rod End on CITROËN C1 (PM_, PN_) 2005 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace CITROËN C1 (PM_, PN_) 1.0 2006 Track Rod End - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. CITROËN C1 (PM_, PN_) 1.4 HDi 2007 Track Rod End replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
  4. Changing Track Rod End on CITROËN C1 (PM_, PN_) 1.4 HDi 2008 by yourself
    Step 4
    Unscrew the wheel bolts.
    Replacement: track rod end – Citroen C1 1 PM PN. Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. How to remove CITROËN C1 1.0 2009 Track Rod End - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Track Rod End on CITROËN C1 (PM_, PN_) 2010: download PDF manuals and video instructions
    Step 6
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush.Use WD-40 spray.
  7. How hard is it to do yourself: Track Rod End replacement on CITROËN C1 (PM_, PN_) 1.0 2011 - download illustrated guide
    Step 7
    Remove the cotter pin fixing the tie rod end fastening.Use a crowbar. Use a flat screwdriver.Use round-nose pliers.
  8. Need to know how to renew Track Rod End on CITROËN C1 ? This free workshop manual will help you to do it yourself
    Step 8
    Remove the cotter pin.Use a crowbar. Use nippers.
    Step 9
    Unscrew the end fastening nut to the steering knuckle.Use a drive socket #17.Use a tap wrench.
  9. Changing of Track Rod End on CITROËN C1 (PM_, PN_) 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 10
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  10. CITROËN C1 1.0 Track Rod End replacement: online guides and video tutorials
    Step 11
    Loosen the lock nut securing the tie rod end to the tie rod.Use a combination spanner #19.
  11. Replacing Track Rod End on CITROËN C1 (PM_, PN_) 2005 1.0 by yourself
    Step 12
    Disconnect the tie rod end from the steering knuckle.Use a ball joint puller.
  12. C1 (PM_, PN_) 1.0 2006 Track Rod End DIY replacement workshop manual
    Step 13
    Screw the end out of the tie rod.
  13. How to change Track Rod End on CITROËN C1 (PM_, PN_) 2007 - tips and tricks
    Step 14
    Clean the mounting seats of the tie rod end.Use a wire brush.Use WD-40 spray.
  14. Step-by-step recommendations for DIY replacement CITROËN C1 (PM_, PN_) 2008 1.0 Track Rod End
    Step 15
    Screw on a new tie rod end.
    Replacement: track rod end – Citroen C1 1 PM PN. AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  15. DIY replacement of Track Rod End on CITROËN C1 (PM_, PN_) 1.0 2009 is not an issue anymore with our step-by-step tutorial
    Step 16
    Connect the tie rod end to the steering knuckle.
  16. How to change Track Rod End on CITROËN C1 (PM_, PN_) 2005 - free PDF and video manuals
    Step 17
    Screw on the fastening nut that connects the tie rod end to the steering knuckle.Use a drive socket #19.Use a ratchet wrench.
  17. How to replace CITROËN C1 (PM_, PN_) 1.0 2006 Track Rod End - step-by-step manuals and video guides
    Step 18
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  18. CITROËN C1 (PM_, PN_) 1.4 HDi 2007 Track Rod End replacement: free workshop manuals
    Step 19
    Tighten the tie rod end locknut.Use a combination spanner #17.Use a combination spanner #19.Use a torque wrench.Tighten it to 55 nm torque.
  19. Changing Track Rod End on CITROËN C1 (PM_, PN_) 1.4 HDi 2008 by yourself
    Step 20
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  20. How to remove CITROËN C1 1.0 2009 Track Rod End - online easy-to-follow instructions
    Step 21
    Tighten the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #19.Use a torque wrench.Tighten it to 75 nm torque.
  21. How to replace Track Rod End on CITROËN C1 (PM_, PN_) 2010: download PDF manuals and video instructions
    Step 22
    Treat the fastener connecting the tie rod end to the steering knuckle. Use copper grease.
  22. How hard is it to do yourself: Track Rod End replacement on CITROËN C1 (PM_, PN_) 1.0 2011 - download illustrated guide
    Step 23
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  23. Need to know how to renew Track Rod End on CITROËN C1 ? This free workshop manual will help you to do it yourself
    Step 24
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    Replacement: track rod end – Citroen C1 1 PM PN. After applying the spray, wait a few minutes.
  24. Changing of Track Rod End on CITROËN C1 (PM_, PN_) 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 25
    Install the wheel.
    Replacement: track rod end – Citroen C1 1 PM PN. Tip from AUTODOC:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  25. CITROËN C1 1.0 Track Rod End replacement: online guides and video tutorials
    Step 26
    Screw in the wheel bolts.Use wheel impact socket #17.
  26. Replacing Track Rod End on CITROËN C1 (PM_, PN_) 2005 1.0 by yourself
    Step 27
    Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 120 nm torque.
    Replacement: track rod end – Citroen C1 1 PM PN. Professionals recommend:
    Check and adjust wheel alignment if necessary.
  27. C1 (PM_, PN_) 1.0 2006 Track Rod End DIY replacement workshop manual
    Step 28
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN C1 (PM_, PN_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN C1 (PM_, PN_) Track Rod End replacement - online guide
Tips & tricks for your CITROËN C1 (PM_, PN_)
View more
  • How to change Tie rod end on CITROËN C1 (PM_, PN_) 1.0 - replacement tricks
    Types of automotive high-temperature greases: where and why to use them | AUTODOC
  • Changing Tie rod end CITROËN C1 (PM_, PN_) 1.0 - Replacement Tips
    How to check your car's heating system | AUTODOC
  • Maintenance Hacks - CITROËN C1 (PM_, PN_) 1.4 HDi Tie rod end replacement guide
    6 tips for keeping your automatic transmission in perfect condition | AUTODOC
  • Replace Tie rod end on CITROËN C1 (PM_, PN_) - free video tips
    TOP 5 WINTER LIFE HACKS FOR YOUR CAR | AUTODOC

Manuals for CITROËN models