Important!
This replacement procedure can be used for:
BMW 3 Saloon (E90) 325 i, BMW 3 Touring (E91) 325 i, BMW 3 Coupe (E92) 325 i, BMW 3 Convertible (E93) 325 i

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on BMW 330i 3 (E92) [TUTORIAL AUTODOC]

Replacement: track rod end – BMW E92. List of the tools you'll need:
Replacement: track rod end – BMW E92. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 17
Drive socket # 21
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Wheel chock
All the parts you need to replace – Track Rod End for 3 Coupe (E92) and other BMW models
How to change Rod Assembly on BMW E92 335i 3.0 – step-by-step instructions for straightforward car repair
Rod Assembly
How to change Rod Assembly on BMW 3 Touring (E91) 325 i – tips for proper car maintenance
BMW 3 Touring (E91) 325 i
Simple DIY car repair steps – Replacing Rod Assembly on BMW 3 Convertible (E93) 325 i
BMW 3 Convertible (E93) 325 i
Easy tricks to help you to replace Rod Assembly on BMW 3 Saloon (E90) 325 i
BMW 3 Saloon (E90) 325 i
Rod Assembly removal & installation, incredibly easy steps for BMW 3 Coupe (E92) 325 i
BMW 3 Coupe (E92) 325 i
How to change Tie Rod End on BMW E92 335i 3.0 – step-by-step instructions for straightforward car repair
Tie Rod End
How to change Tie Rod End on BMW 3 Touring (E91) 325 i – tips for proper car maintenance
BMW 3 Touring (E91) 325 i
Simple DIY car repair steps – Replacing Tie Rod End on BMW 3 Convertible (E93) 325 i
BMW 3 Convertible (E93) 325 i
Easy tricks to help you to replace Tie Rod End on BMW 3 Saloon (E90) 325 i
BMW 3 Saloon (E90) 325 i
Tie Rod End removal & installation, incredibly easy steps for BMW 3 Coupe (E92) 325 i
BMW 3 Coupe (E92) 325 i
Replacement: track rod end – BMW E92. Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • Please note: all work on the car – BMW E92 – should be done with the engine switched off.
Carry out replacement in the following order:
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 3 Coupe (E92) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 3 Coupe (E92) Track Rod End replacement - online guide
Tips & tricks for your BMW 3 Coupe (E92)
View more
  • How to change Tie rod end on BMW 3 Coupe (E92) 335d 3.0 - replacement tricks
    How to remove a broken bolt without welding | AUTODOC tips
  • Changing Outer tie rod BMW E92 335i 3.0 - Replacement Tips
    Noise from under the hood | AUTODOC TIPS
  • Maintenance Hacks - BMW 3 Coupe (E92) 320d 2.0 Outer tie rod end replacement guide
    How to fix a knocking and creaking suspension | AUTODOC
  • Replace Track rod end ball joint on BMW E92 - free video tips
    6 SIGNS OF A BAD FUEL FILTER | AUTODOC