Disclaimer
How to change front anti roll bar links on Toyota Prius 2 – replacement guide
downloads:
1
Views:
57
Important!
This replacement procedure can be used for:
TOYOTA PRIUS Hatchback (NHW20_) 1.5 Hybrid (NHW20_) … View more
The steps may slightly vary depending on the car design.
TOYOTA PRIUS Hatchback (NHW20_) 1.5 Hybrid (NHW20_) … View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link on TOYOTA PRIUS 2 (NHW20) [TUTORIAL AUTODOC]
All the parts you need to replace – Anti Roll Bar Links for PRIUS Hatchback (NHW20_) and other TOYOTA models
Anti-roll bar link
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
HEX bit no.H6
Wheel impact socket #21
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on Toyota Prius 2 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – Toyota Prius 2. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – Toyota Prius 2. Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H6. Use a combination spanner #17. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – Toyota Prius 2. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #19. Use a drive socket #19. Use HEX No.H6. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Prius II Liftback (XW20) model.
Popular maintenance tutorials for Toyota Prius 2
Free download PDF
1.48 MB
Free download PDF1.65 MB
Free download PDF1.5 MB
Free download PDF1.83 MB
Free download PDF1.21 MB
Free download PDF1.91 MB
Complete guides for changing the Drop links on different TOYOTA PRIUS models
Free download PDF1.17 MB
Free download PDF1.26 MB
Free download PDF1.17 MB
Free download PDF1.24 MB
Free download PDF1.24 MB
Free download PDF972.8 KB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your TOYOTA PRIUS Hatchback (NHW20_)
View more
TOP 8 mistakes car owners make | AUTODOC tips
5 car tips for a winter's day | AUTODOC tips
How to easily repair a punctured tyre | AUTODOC tips
How to repair a chipped or cracked windscreen | AUTODOC tips
