Important!
This replacement procedure can be used for:
TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_)

The steps may slightly vary depending on the car design.

How to change front anti roll bar link / front drop link on TOYOTA AYGO 1 (AB10) [TUTORIAL AUTODOC]

Replacement: anti roll bar links – Toyota Aygo AB1. Tools you'll need:
Replacement: anti roll bar links – Toyota Aygo AB1. Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Impact socket №16
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Crow bar
Wheel chock
All the parts you need to replace – Anti Roll Bar Links for AYGO (WNB1_, KGB1_) and other TOYOTA models
How to change Repair Kit, stabilizer suspension on Toyota Aygo ab1 1 – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer suspension
How to change Repair Kit, stabilizer suspension on TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_) – tips for proper car maintenance
TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_)
How to change Rod / Strut, stabiliser on Toyota Aygo ab1 1 – step-by-step instructions for straightforward car repair
Rod / Strut, stabiliser
How to change Rod / Strut, stabiliser on TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_) – tips for proper car maintenance
TOYOTA AYGO (WNB1_, KGB1_) 1.0 (KGB10_)
AUTODOC recommends:
  • Replace the stabiliser links on Toyota Aygo AB1 in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – Toyota Aygo AB1. Take the following steps:
  1. How to change Anti Roll Bar Links on Toyota Aygo ab1 2005 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #19.
  2. How to replace TOYOTA AYGO (WNB1_, KGB1_) 1 2006 Anti Roll Bar Links - step-by-step manuals and video guides
    Step 3
    Raise the front of the car and secure on supports.
  3. Toyota Aygo ab1 1.4 HDi 2007 Anti Roll Bar Links replacement: free workshop manuals
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Toyota Aygo AB1
  4. Changing Anti Roll Bar Links on TOYOTA AYGO (WNB1_, KGB1_) 1 2008 by yourself
    Step 5
    Remove the wheel.
  5. How to remove TOYOTA AYGO 1.4 HDi 2009 Anti Roll Bar Links - online easy-to-follow instructions
    Step 6
    Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
  6. How to replace Anti Roll Bar Links on TOYOTA AYGO (WNB1_, KGB1_) 2010: download PDF manuals and video instructions
    Step 7
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar.Use a combination spanner #16.
  7. How hard is it to do yourself: Anti Roll Bar Links replacement on Toyota Aygo ab1 1 2011 - download illustrated guide
    Step 8
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16.Use a drive socket #16.Use a ratchet wrench.
  8. Need to know how to renew Anti Roll Bar Links on TOYOTA AYGO ? This free workshop manual will help you to do it yourself
    Step 9
    Remove the stabilizer rod.Use a crowbar.
    Replacement: anti roll bar links – Toyota Aygo AB1. Professionals recommend:
    Examine stabiliser bushes. Replace them if needed.
  9. Changing of Anti Roll Bar Links on Toyota Aygo ab1 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 10
    Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
    Step 11
    Install a new rod, tighten the fasteners.
  10. TOYOTA AYGO 1.0 GPL (KGB10_) Anti Roll Bar Links replacement: online guides and video tutorials
    Step 12
    Support the arm. Use a hydraulic transmission jack.
  11. Replacing Anti Roll Bar Links on Toyota Aygo ab1 2005 1 by yourself
    Step 13
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16.Use a drive socket #16.Use a torque wrench.Tighten it to 40 Nm torque.
  12. AYGO (WNB1_, KGB1_) 1.4 HDi 2006 Anti Roll Bar Links DIY replacement workshop manual
    Step 14
    Tighten the fastener connecting the stabilizer link to the stabilizer bar.Use a drive socket #16.Use a torque wrench.Tighten it to 40 Nm torque.
  13. How to change Anti Roll Bar Links on TOYOTA AYGO (WNB1_, KGB1_) 2007 - tips and tricks
    Step 15
    Remove the support from under the arm.
    Replacement: anti roll bar links – Toyota Aygo AB1. AUTODOC recommends:
    Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
  14. Step-by-step recommendations for DIY replacement Toyota Aygo ab1 2008 1.4 HDi Anti Roll Bar Links
    Step 16
    Treat all joints of the stabiliser link.Use copper grease.
  15. DIY replacement of Anti Roll Bar Links on TOYOTA AYGO (WNB1_, KGB1_) 1.0 GPL (KGB10_) 2009 is not an issue anymore with our step-by-step tutorial
    Step 17
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  16. How to change Anti Roll Bar Links on Toyota Aygo ab1 2005 - free PDF and video manuals
    Step 18
    Clean the wheel rim mounting seat. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: anti roll bar links – Toyota Aygo AB1. After applying the spray, wait a few minutes.
  17. How to replace TOYOTA AYGO (WNB1_, KGB1_) 1 2006 Anti Roll Bar Links - step-by-step manuals and video guides
    Step 19
    Install the wheel.
    AUTODOC recommends:
    Important! Hold the wheel while screwing in the fastening bolts. Toyota Aygo AB1
  18. Toyota Aygo ab1 1.4 HDi 2007 Anti Roll Bar Links replacement: free workshop manuals
    Step 20
    Screw in the wheel bolts.Use wheel impact socket #19.
  19. Changing Anti Roll Bar Links on TOYOTA AYGO (WNB1_, KGB1_) 1 2008 by yourself
    Step 21
    Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 120 nm torque.
    Step 22
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
TOYOTA AYGO (WNB1_, KGB1_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY TOYOTA AYGO (WNB1_, KGB1_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your TOYOTA AYGO (WNB1_, KGB1_)
View more
  • How to change Sway bar links on TOYOTA AYGO (WNB1_, KGB1_) 1.0 GPL (KGB10_) - replacement tricks
    Reasons to check your exhaust system | How to inspect the exhaust system | AUTODOC
  • Changing Stabiliser link Toyota Aygo ab1 1 - Replacement Tips
    Brake discs overheating: why it happens and how to fix it | AUTODOC's tips
  • Maintenance Hacks - TOYOTA AYGO (WNB1_, KGB1_) 1.4 HDi Drop links replacement guide
    What if your car's hood won't open? | AUTODOC TIPS
  • Replace Stabilizer bar link on Toyota Aygo ab1 - free video tips
    Top 10 car parts and assemblies not recommended for DIY changement | Tips from AUTODOC

Manuals for TOYOTA models