
Disclaimer
How to change third brake light on OPEL Vivaro A Van (X83) – replacement guide
downloads:
0
Views:
1
Important!
This replacement procedure can be used for:
OPEL Vivaro A Van (X83) 1.9 DI (F7), OPEL Vivaro A Van (X83) 1.9 DTI (F7), OPEL Vivaro A Van (X83) 2.0 16V (F7), OPEL Vivaro A Van (X83) 2.5 DTI (F7), OPEL Vivaro A Van (X83) 2.0 ECOTEC (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7) … View more
The steps may slightly vary depending on the car design.
OPEL Vivaro A Van (X83) 1.9 DI (F7), OPEL Vivaro A Van (X83) 1.9 DTI (F7), OPEL Vivaro A Van (X83) 2.0 16V (F7), OPEL Vivaro A Van (X83) 2.5 DTI (F7), OPEL Vivaro A Van (X83) 2.0 ECOTEC (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Auxiliary Stop Light for Vivaro A Van (X83) and other OPEL models
Alternative products

Electronic spray
8 mm socket
10 mm socket
Ratchet wrench
Masking tape
Plastic trim removal tool
Slotted screwdriver
Clip removal tool
Transmission jack
Wide wooden block
Replacement: third brake light – OPEL VIVARO Box (F7). AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: third brake light – OPEL VIVARO Box (F7). Use the following procedure:
- Step 1
Secure the third brake light. Use masking tape. - Step 2
Open the rear door. - Step 3
Unscrew the fastener of the third brake light. Use an 8 mm socket. Use a ratchet wrench. - Step 4Close the rear door.Step 5
Remove the masking tape. - Step 6
Remove the third brake light. Use a plastic trim removal tool. - Step 7
Detach the connector from the third brake light.Replacement: third brake light – OPEL VIVARO Box (F7). AUTODOC experts recommend:If necessary, use a slotted screwdriver to release the connector. - Step 8
Treat the third brake light connector. Use an electronic spray. - Step 9
Install the bulb in the new third brake light. - Step 10
Attach the connector to the new third brake light.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Vivaro A Van (X83) model
Popular maintenance tutorials for Opel Vivaro Van
Complete guides for changing the Auxiliary stop light on different OPEL VIVARO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Vivaro A Van (X83)
View more
Checking the starter without removing it | AUTODOC tips
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
What to do if the ABS light comes on: DIY Diagnostics Tips
How to get your motorcycle ready for spring
Most commonly replaced car parts on OPEL VIVARO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















