How to change spark plugs on VW Transporter VI Van (SGA, SGH) – replacement guide
downloads:
0
Views:
7
0
Users voted – 0
Recommended replacement interval for the part category Spark plug : 4year / 60000km
Important!
This replacement procedure can be used for:
VW Transporter VI Van (SGA, SGH) 2.0 TSI,
VW Transporter VI Van (SGA, SGH) 2.0 TSI 4motion,
VW Transporter VI Van (SGA, SGH) 2.0 TSI
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Transporter VI Van (SGA, SGH) and other VW models
Remember the sequence of steps for ignition coil demounting.
Step 8
Clean dirt, dust and debris from inside the spark plug wells.
Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
Step 10
Take out the spark plugs.
Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease.
Step 12
Install the new spark plugs into their mounting seats.
Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.
Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection.
Step 14
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
Replacement: spark plugs – VW TRANSPORTER VI Box (SGA, SGH). Tip from AUTODOC experts:
Follow the installation sequence.
Step 15
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
AUTODOC recommends:
Replacement: spark plugs – VW TRANSPORTER VI Box (SGA, SGH). After applying the spray, wait a few minutes.
Step 16
Plug in the connectors of the ignition coils.
Step 17
Secure the wiring of the ignition coils in its mounting seats.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW Transporter VI Van (SGA, SGH)
View more
How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
DIY valve cover restoration | AUTODOC tips
How to restore a steering wheel | AUTODOC tips
How to remove scratches from a car | AUTODOC tips
Most commonly replaced car parts on VW TRANSPORTER