How to change spark plugs on VW Passat CC (357) – replacement guide
downloads:
1
Views:
152
0
Users voted – 0
Recommended replacement interval for the part category Spark plug : 6year / 90000km
Important!
This replacement procedure can be used for:
VW Passat CC (357) 2.0 TSI,
VW Passat CC (357) 1.8 TSI,
VW Passat CC (357) 1.8 TSI,
VW Passat CC (357) 2.0 TFSI
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Passat CC (357) and other VW models
Replacement: spark plugs – VW PASSAT CC (357). Professionals recommend:
The replacement procedure is the same for all spark plugs.
All work should be done with the engine stopped.
Replacement: spark plugs – VW PASSAT CC (357). Take the following steps:
Step 1
Open the hood.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Remove the engine cover.
Step 4
Unplug the connectors from the ignition coils.
Step 5
Raise a little the wiring of the ignition coils and move it aside.
Step 6
Pry up the ignition coil (4 pieces). Use a crowbar.
Step 7
Take out the ignition coils from the spark plug wells.
Replacement: spark plugs – VW PASSAT CC (357). Tip:
Remember the sequence of steps for ignition coil demounting.
Step 8
Clean dirt, dust and debris from inside the spark plug wells.
Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
Step 10
Take out the spark plugs.
Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease.
Step 12
Install the new spark plugs into their mounting seats.
Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.
Replacement: spark plugs – VW PASSAT CC (357). AUTODOC recommends:
Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection.
Step 14
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
Replacement: spark plugs – VW PASSAT CC (357). Tip from AUTODOC experts:
Follow the installation sequence.
Step 15
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
AUTODOC recommends:
Replacement: spark plugs – VW PASSAT CC (357). After applying the spray, wait a few minutes.
Step 16
Plug in the connectors of the ignition coils.
Step 17
Secure the wiring of the ignition coils in its mounting seats.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW Passat CC (357)
View more
How to restore wheel rims | AUTODOC tips
How to easily repair a punctured tyre | AUTODOC tips