Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 19
Treat the ignition coil tip. Use high-temperature grease.
Step 20
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners and the throttle body air intake hose.Do not apply excessive force when installing the part. Otherwise you may damage the fasteners.
Step 28
Attach the crankcase ventilation hose to the engine cover at the left.
Step 29
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 30
Shut off the engine.
Step 31
Remove the fender protection cover.
Step 32
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Skoda Rapid Saloon
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your SKODA Rapid Saloon (NA2)
View more
How to choose the right engine oil for your car | AUTODOC
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
How to start a car after a long idle period | AUTODOC tips
Car checks you need to carry out on your car after the winter | AUTODOC tips