Replacement: spark plugs – HONDA JAZZ III (GE). AUTODOC experts recommend:
The replacement procedure is the same for all spark plugs.
Warning! Shut down the engine before starting any work – HONDA JAZZ III (GE).
Carry out replacement in the following order:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Remove the engine cover.
Step 4
Unplug the connectors from the ignition coils.
Step 5
Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
Step 6
Take out the ignition coils from the spark plug wells.
Replacement: spark plugs – HONDA JAZZ III (GE). AUTODOC recommends:
Remember the sequence of steps for ignition coil demounting.
Step 7
Clean dirt, dust and debris from inside the spark plug wells.
Step 8
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
Step 9
Take out the spark plugs. Use a telescoping magnet.
Step 10
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Use a flat screwdriver.
Step 11
Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
Step 12
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.
Replacement: spark plugs – HONDA JAZZ III (GE). Professionals recommend:
Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 13
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
AUTODOC recommends:
Replacement: spark plugs – HONDA JAZZ III (GE). Follow the installation steps.
Step 14
Tighten the ignition coil fastening. Use a drive socket #10. Use a torque wrench. Tighten it to 8 nm torque.
Step 15
Plug in the connectors of the ignition coils.
Step 16
Install the engine cover.
Step 17
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 18
Shut off the engine.
Step 19
Remove the fender protection cover.
Step 20
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_)
View more
TOP 4 car cleaning products | AUTODOC tips
Top 5 mistakes when buying car parts
The most common problems when buying a used car | AUTODOC