Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 19
Treat the ignition coil tips. Use high-temperature grease.
Step 20
Install the ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
Step 21
Tighten the ignition coil fastening. Use a drive socket #10. Use a torque wrench. Tighten it to 9 nm torque.
Step 22
Attach the connector to the intake manifold.
Step 23
Attach the PCV valve.
Step 24
Connect the crankcase ventilation hose to the intake manifold.
Step 25
Attach the throttle valve connectors.
Step 26
Remove the microfibre cloth from the PCV valve hole.
Step 27
Install the crankcase ventilation hoses.
Step 28
Connect the crankcase ventilation hose to the air duct.
Step 29
Plug in the ignition coil connector.
Step 30
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 31
Shut off the engine.
Step 32
Remove the fender protection cover. Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Citroen Xsara Estate
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your CITROËN XSARA Break (N2)
View more
How to start a car after a long idle period | AUTODOC tips
Things you should never do with your manual transmission | AUTODOC tips
5 mistakes made when washing the engine | AUTODOC tips