When to replace the Poly V-Belt on your VW GOLF
Recommended replacement interval for the part category Serpentine belt : 60000 km
Important!
This replacement procedure can be used for:
VW GOLF III Variant (1H5) 1.4, VW GOLF III Variant (1H5) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for GOLF III Variant (1H5) and other VW models
Tools
Replacement: serpentine belt – VW GOLF III Variant (1H5). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – VW GOLF III Variant (1H5). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW GOLF III Variant (1H5)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on Golf 3 Estate 1993 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace VW GOLF III Variant (1H5) 1.9 TDI 1994 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – VW GOLF III Variant (1H5). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    Golf 3 Estate 1.8 1995 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – VW GOLF III Variant (1H5). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf III Estate (1H5) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW GOLF III Variant (1H5) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW GOLF III Variant (1H5) Poly V-Belt replacement - online guide
Tips & tricks for your VW GOLF III Variant (1H5)
View more
  • How to change Alternator belt on VW GOLF III Variant (1H5) 1.6 - replacement tricks
    How to clean an engine bay | AUTODOC
  • Changing Auxiliary belt Golf 3 Estate 1.9 TDI - Replacement Tips
    How to restore wheel rims | AUTODOC tips
  • Maintenance Hacks - VW GOLF III Variant (1H5) 1.8 Poly V-belt replacement guide
    How to save when buying car parts
  • Replace Drive belt on Golf 3 Estate - free video tips
    DIY starter repair | AUTODOC tips