When to replace the Poly V-Belt on your RENAULT MEGANE
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi (KMRG, KM1G, KM0G, KM2C), RENAULT MEGANE II Estate (KM0/1_) 2.0, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for MEGANE II Estate (KM0/1_) and other RENAULT models
How to change Serpentine belt on Renault Megane 2 Sport Tourer 1.5 dCi – step-by-step instructions for straightforward car repair Serpentine belt
How to change V-Ribbed Belt Set on Renault Megane 2 Sport Tourer 1.5 dCi – step-by-step instructions for straightforward car repair V-Ribbed Belt Set
Tools
Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). Tools you need:
Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Megane 2 Sport Tourer 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace RENAULT MEGANE II Estate (KM0/1_) 1.5 dCi 2004 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Renault Megane 2 Sport Tourer 1.6 2005 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE II Estate (KM0/1_)
  4. Step 7
    Changing Poly V-Belt on RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi 2006 by yourself
    Remove the wheel.
  5. Step 8
    How to remove RENAULT MEGANE 1.5 dCi (KM02, KM13) 2007 Poly V-Belt - online easy-to-follow instructions
    Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench.
  6. Step 9
    How to replace Poly V-Belt on RENAULT MEGANE II Estate (KM0/1_) 2008: download PDF manuals and video instructions
    Remove the wheel arch cover.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Megane 2 Sport Tourer 1.5 dCi (KM0F, KM0T, KM2B) 2009 - download illustrated guide
    Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT MEGANE 2010? This free workshop manual will help you to do it yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
  9. Step 12
    Changing of Poly V-Belt on Renault Megane 2 Sport Tourer 2011 won't be an issue if you follow this illustrated step-by-step guide
    Remove the V-ribbed belt.
  10. Step 13
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). AUTODOC experts recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 14
    RENAULT MEGANE 2.0 Poly V-Belt replacement: online guides and video tutorials
    Install the V-ribbed belt.
    Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). Tip from AUTODOC:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  11. Step 15
    Replacing Poly V-Belt on Renault Megane 2 Sport Tourer 2003 1.5 dCi by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT MEGANE II Estate (KM0/1_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT MEGANE II Estate (KM0/1_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT MEGANE II Estate (KM0/1_)
View more
  • How to change Alternator belt on RENAULT MEGANE II Estate (KM0/1_) 1.6 16V - replacement tricks
    DIY valve cover restoration | AUTODOC tips
  • Changing Auxiliary belt Renault Megane 2 Sport Tourer 1.5 dCi - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Maintenance Hacks - RENAULT MEGANE II Estate (KM0/1_) 1.6 Poly V-belt replacement guide
    Causes of a worn car boot damper | AUTODOC
  • Replace Drive belt on Renault Megane 2 Sport Tourer - free video tips
    How to unlock your car without a key | AUTODOC tips