Recommended replacement interval for the part category Serpentine belt : 10 year / 240000 km

Important!

This replacement procedure can be used for:
FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for TRANSIT CONNECT Kombi and other FORD models

Serpentine belt

        Serpentine belt for Transit Connect Mk2 Estate Diesel (75 hp)
      
        Serpentine belt for Transit Connect Mk2 Estate Diesel (95 hp)
      
        Serpentine belt for Transit Connect Mk2 Estate Diesel (115 hp)
      
        Serpentine belt for Transit Connect Mk2 Estate Diesel (101 hp)
      
        Serpentine belt for Transit Connect Mk2 Estate Diesel (120 hp)
      
        Serpentine belt for Transit Connect Mk2 Estate Diesel (75 hp)

Replacement: serpentine belt – FORD TRANSIT CONNECT Kombi. Tools you'll need:

                        Combination spanner #15
                      
                        Torx bit T30
                      
                        Ratchet wrench
                      
                        Fender cover

Buy tools

Replacement: serpentine belt – FORD TRANSIT CONNECT Kombi. AUTODOC recommends:

All work should be done with the engine stopped.

Replacement: serpentine belt – FORD TRANSIT CONNECT Kombi. Use the following procedure:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Lift the car using a jack or place it over an inspection pit.

Step 4

Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench.
Step 5

Remove the oil pan cover.
Step 6

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
Step 7

Remove the V-ribbed belt.
Step 8

Return the tensioner pulley to its initial position.

Replacement: serpentine belt – FORD TRANSIT CONNECT Kombi. Professionals recommend:
Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
Step 9

Install the V-ribbed belt.

Replacement: serpentine belt – FORD TRANSIT CONNECT Kombi. AUTODOC experts recommend:
Make sure that the V-ribbed belt fits all pulleys snugly.
Step 10

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.

Step 11

Place the V-ribbed belt on the tensioner pulley.
Step 12

Return the tensioner pulley to its initial position. Use a combination spanner #15.

Step 13

Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.

Step 14

Shut off the engine.

Step 15

Reinstall the oil pan lower cover.
Step 16

Tighten the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench.

Step 17

Lower the car.

Step 18

Remove the fender protection cover.

Step 19

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Connect Mk2 Estate model.

Browse tyres

How to change front brake pads on FORD Transit Connect Mk2 Estate – replacement guide

Free download PDF
2.35 MB
How to change rear brake pads on FORD TRANSIT CONNECT Kombi – replacement guide

Free download PDF
1.71 MB
How to change front windshield wipers on FORD Transit Connect Mk2 Estate – replacement guide

Free download PDF
1.51 MB
How to change rear windshield wipers on FORD Transit Connect Mk2 Estate – replacement guide

Free download PDF
1.44 MB
How to change front anti roll bar links on FORD TRANSIT CONNECT Kombi – replacement guide

Free download PDF
1.25 MB
How to change engine oil and filter on FORD Transit Connect Mk2 Estate – replacement guide

Free download PDF
2.56 MB

How to change serpentine belt on FORD Transit Connect Mk1 Van – replacement guide

Free download PDF
1.45 MB
How to change serpentine belt on FORD Transit Connect V408 Van – replacement guide

Free download PDF
768 KB
How to change serpentine belt on a car – replacement tutorial

Universal

Free download PDF
1.51 MB
How to change serpentine belt on Ford Fiesta V JH JD – replacement guide

Free download PDF
2.14 MB
How to change serpentine belt on Ford Focus DAW – replacement guide

Free download PDF
1.63 MB
How to change serpentine belt on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.77 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

5 Tips for New Drivers | AUTODOC tips

3K views

Published on: 31/01/2023
Top 5 mistakes when buying car parts

3K views

Published on: 10/03/2022
Top 5 brake repair mistakes | AUTODOC tips

184K views

Published on: 27/10/2022
How to choose the right engine oil for your car | AUTODOC

8K views

Published on: 01/07/2020