When to replace the Poly V-Belt on your FORD FOCUS
Recommended replacement interval for the part category Serpentine belt : 10 year / 200000 km
Important!
This replacement procedure can be used for:
FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: serpentine belt – FORD FOCUS II (DA_). Tools you'll need:
Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – FORD FOCUS II (DA_). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – FORD FOCUS II (DA_). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Ford Focus Mk2 2004 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench.
  2. Step 5
    How to replace FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi 2005 Poly V-Belt - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 6
    Ford Focus Mk2 1.8 TDCi 2006 Poly V-Belt replacement: free workshop manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
  4. Step 7
    Changing Poly V-Belt on FORD Focus II Hatchback (DA_, HCP, DP) 2.5 ST 2007 by yourself
    Remove the V-ribbed belt.
  5. Step 8
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – FORD FOCUS II (DA_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 9
    How to remove FORD FOCUS 1.6 Ti 2008 Poly V-Belt - online easy-to-follow instructions
    Install the V-ribbed belt.
    Replacement: serpentine belt – FORD FOCUS II (DA_). AUTODOC experts recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  6. Step 10
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
    Step 11
    How to replace Poly V-Belt on FORD Focus II Hatchback (DA_, HCP, DP) 2009: download PDF manuals and video instructions
    Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Hatchback (DA_, HCP, DP) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD Focus II Hatchback (DA_, HCP, DP) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD Focus II Hatchback (DA_, HCP, DP) Poly V-Belt replacement - online guide
Tips & tricks for your FORD Focus II Hatchback (DA_, HCP, DP)
View more
  • How to change Alternator belt on FORD Focus II Hatchback (DA_, HCP, DP) 1.6 - replacement tricks
    How to restore a steering wheel | AUTODOC tips
  • Changing Auxiliary belt Ford Focus Mk2 1.6 TDCi - Replacement Tips
    How to find and change a fuse | AUTODOC
  • Maintenance Hacks - FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi Poly V-belt replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Drive belt on Ford Focus Mk2 - free video tips
    How and why to check your oil | AUTODOC tips