When to replace the Poly V-Belt on your CITROËN XSARA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN Xsara Box Body / Estate 1.8 D View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Xsara Box Body / Estate and other CITROËN models
Tools
Replacement: serpentine belt – CITROËN XSARA Box. List of the tools you'll need:
Wire brush
Torque wrench
Drive socket # 27
HEX bit no.H8
1/4" square drive extension bar
Wheel impact socket #19
Ratchet wrench
Clip removal tool
Phillips screwdriver
Fender cover
Wheel chock
Replacement: serpentine belt – CITROËN XSARA Box. Tools you might need:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN XSARA Box. Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    How to change Poly V-Belt on Xsara 1998 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 5
    Raise the car.
    Replacement: serpentine belt – CITROËN XSARA Box. AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 6
    How to replace CITROËN Xsara Box Body / Estate 2.0 HDi 1999 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN XSARA Box
  3. Step 7
    Xsara 1.9 D 2000 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 8
    Changing Poly V-Belt on CITROËN Xsara Box Body / Estate 1.5 D 2001 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool. Use a Phillips screwdriver.
  5. Step 9
    How to remove CITROËN XSARA 1.4 2002 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 10
    How to replace Poly V-Belt on CITROËN Xsara Box Body / Estate 2003: download PDF manuals and video instructions
    Release the coolant pipe fasteners.
  7. Step 11
    How hard is it to do yourself: Poly V-Belt replacement on Xsara 1.9 D 2004 - download illustrated guide
    Clean the tensioner pulley fastener. Use a wire brush.
  8. Step 12
    Need to know how to renew Poly V-Belt on CITROËN XSARA 2005? This free workshop manual will help you to do it yourself
    Loosen the tensioner pulley fastener. Use HEX No.H8. Use a ratchet wrench.
  9. Step 13
    Changing of Poly V-Belt on Xsara 1998 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a 1/4" square drive extension bar. Use a ratchet wrench.
  10. Step 14
    CITROËN XSARA 1.5 D Poly V-Belt replacement: online guides and video tutorials
    Remove the V-ribbed belt.
    Replacement: serpentine belt – CITROËN XSARA Box. Tip from AUTODOC experts:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  11. Step 15
    Replacing Poly V-Belt on Xsara 2000 2.0 HDi by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN XSARA Box. Professionals recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  12. Step 16
    Xsara Box Body / Estate 1.4 2001 Poly V-Belt DIY replacement workshop manual
    Tension the belt by turning the tensioner pulley clockwise. Use a 1/4" square drive extension bar. Use a ratchet wrench.
    Replacement: serpentine belt – CITROËN XSARA Box. Tip:
    Keep the belt taut until you've tightened the tensioner pulley fastener.
  13. Step 17
    How to change Poly V-Belt on CITROËN Xsara Box Body / Estate 2002 - tips and tricks
    Tighten the fastener of the serpentine belt tensioner pulley. Use HEX No.H8. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Box Body / Estate model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN Xsara Box Body / Estate Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN Xsara Box Body / Estate Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN Xsara Box Body / Estate
View more
  • How to change Alternator belt on CITROËN Xsara Box Body / Estate 1.8 D - replacement tricks
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Auxiliary belt Xsara 2.0 HDi - Replacement Tips
    How to fix your car with AUTODOC CLUB
  • Maintenance Hacks - CITROËN Xsara Box Body / Estate 1.9 D Poly V-belt replacement guide
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Replace Drive belt on Xsara - free video tips
    How to replace a wheel stud | AUTODOC tips