Important!
This replacement procedure can be used for:
FORD FOCUS (DAW, DBW) 1.8 Turbo DI / TDDi, FORD FOCUS (DAW, DBW) 1.8 TDCi View more

The steps may slightly vary depending on the car design.

How to replace engine mount on FORD FOCUS (DAW) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Engine Mount for FOCUS (DAW, DBW) and other FORD models
How to change Engine mount on Ford Focus Mk1 1.6 16V – step-by-step instructions for straightforward car repair
Engine mount
How to change Holder, engine mounting on Ford Focus Mk1 1.6 16V – step-by-step instructions for straightforward car repair
Holder, engine mounting
How to change Bracket, engine mounting on Ford Focus Mk1 1.6 16V – step-by-step instructions for straightforward car repair
Bracket, engine mounting
How to change Engine Transverse Strut on Ford Focus Mk1 1.6 16V – step-by-step instructions for straightforward car repair
Engine Transverse Strut
Tools
Replacement: engine mounts – Ford Focus DAW. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 10
Drive socket # 16
Ratchet wrench
Flat Screwdriver
Jack
Fender cover
Replacement: engine mounts – Ford Focus DAW. AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – Ford Focus DAW. Use the following procedure:
  1. Step 1
    How to change Engine Mount on Ford Focus Mk1 1998 - free PDF and video manuals
    Open the bonnet.
  2. Step 2
    How to replace FORD FOCUS (DAW, DBW) 1.6 16V 1999 Engine Mount - step-by-step manuals and video guides
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  3. Step 3
    Ford Focus Mk1 1.8 Turbo DI / TDDi 2000 Engine Mount replacement: free workshop manuals
    Unscrew the fasteners of the coolant reservoir. Use a drive socket #10. Use a ratchet wrench.
  4. Step 4
    Changing Engine Mount on FORD FOCUS (DAW, DBW) 1.4 16V 2001 by yourself
    Release the coolant reservoir retainers. Use a flat screwdriver.
  5. Step 5
    How to remove FORD FOCUS 1.8 16V 2002 Engine Mount - online easy-to-follow instructions
    Remove the coolant reservoir.
  6. Step 6
    How to replace Engine Mount on FORD FOCUS (DAW, DBW) 2003: download PDF manuals and video instructions
    Support the engine in the oil pan area. Use a jack.
  7. Step 7
    How hard is it to do yourself: Engine Mount replacement on Ford Focus Mk1 2.0 16V 2004 - download illustrated guide
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 8
    Need to know how to renew Engine Mount on FORD FOCUS 2005? This free workshop manual will help you to do it yourself
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  9. Step 9
    Changing of Engine Mount on Ford Focus Mk1 2006 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
  10. Step 10
    FORD FOCUS 1.6 16V Flexifuel Engine Mount replacement: online guides and video tutorials
    Remove the engine mount.
    Replacement: engine mounts – Ford Focus DAW. Tip from AUTODOC experts:
    Carefully check the other engine mounts and replace them if necessary.
  11. Step 11
    Replacing Engine Mount on Ford Focus Mk1 1998 1.6 16V by yourself
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  12. Step 12
    FOCUS (DAW, DBW) 1.8 16V 1999 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 13
    How to change Engine Mount on FORD FOCUS (DAW, DBW) 2000 - tips and tricks
    Raise the jack by 10–15 cm.
  14. Step 14
    Step-by-step recommendations for DIY replacement Ford Focus Mk1 2001 1.8 16V Engine Mount
    Screw in the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD FOCUS (DAW, DBW) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD FOCUS (DAW, DBW) Engine Mount replacement - online guide
Tips & tricks for your FORD FOCUS (DAW, DBW)
View more
  • How to change Engine mounts on FORD FOCUS (DAW, DBW) 1.8 TDCi - replacement tricks
    Coolant comparison test | AUTODOC
  • Changing Engine mounting Ford Focus Mk1 1.6 16V - Replacement Tips
    Top 6 products for enhancing your car | AUTODOC tips
  • Maintenance Hacks - FORD FOCUS (DAW, DBW) 1.8 Turbo DI / TDDi Motor mounts replacement guide
    How to save when buying car parts
  • Replace Motor mount on Ford Focus Mk1 - free video tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips