Replacement: windshield wipers – KIA RIO III (UB). AUTODOC experts recommend:
All work should be done with the engine stopped.
Replacement: windshield wipers – KIA RIO III (UB). Use the following procedure:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip. Use a flat screwdriver.
Step 4
Remove the blade from the wiper arm.
Replacement: windshield wipers – KIA RIO III (UB). AUTODOC recommends:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – KIA RIO III (UB). Tip from AUTODOC:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.