Important!
This replacement procedure can be used for:
FORD FUSION (JU_) 1.4 LPG, FORD FUSION (JU_) 1.25, FORD FUSION (JU_) 1.6 TDCi, FORD FUSION (JU_) 1.4 TDCi, FORD FUSION (JU_) 1.6, FORD FUSION (JU_) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for FUSION (JU_) and other FORD models
How to change Wheel bearing kit on Ford Fusion ju2 1.4 TDCi – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on Ford Fusion ju2 1.4 TDCi – step-by-step instructions for straightforward car repair
Wheel bearing
How to change Cap, wheel bearing on Ford Fusion ju2 1.4 TDCi – step-by-step instructions for straightforward car repair
Cap, wheel bearing
Tools
Replacement: wheel bearing – FORD FUSION (JU_). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 30
Wheel impact socket #19
Torque wrench
Hammer
Flat Screwdriver
Bush and bearing driver set
Circlip pliers
Wheel chock
Replacement: wheel bearing – FORD FUSION (JU_). Tip from AUTODOC:
  • Do not re-use the bearing assembly of your FORD FUSION (JU_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – FORD FUSION (JU_). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Ford Fusion ju2 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD FUSION (JU_) 1.4 TDCi 2003 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Ford Fusion ju2 1.4 2004 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FORD FUSION (JU_)
  4. Step 5
    Changing Wheel Bearing on FORD FUSION (JU_) 1.6 TDCi 2005 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove FORD FUSION 1.25 2006 Wheel Bearing - online easy-to-follow instructions
    Remove the hub bearing protection cap. Use a flat screwdriver. Use a hammer.
    Replacement: wheel bearing – FORD FUSION (JU_). AUTODOC recommends:
    Some cars are not equipped with wheel hub caps.
  6. Step 8
    How to replace Wheel Bearing on FORD FUSION (JU_) 2007: download PDF manuals and video instructions
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Ford Fusion ju2 1.3 2008 - download illustrated guide
    Unscrew the hub bearing mounting. Use a drive socket #30.
  8. Step 10
    Need to know how to renew Wheel Bearing on FORD FUSION 2009? This free workshop manual will help you to do it yourself
    Remove the brake drum.
    Replacement: wheel bearing – FORD FUSION (JU_). Professionals recommend:
    Examine the brake drum. Replace it if necessary.
  9. Step 11
    Changing of Wheel Bearing on Ford Fusion ju2 2010 won't be an issue if you follow this illustrated step-by-step guide
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  10. Step 12
    FORD FUSION 1.4 Wheel Bearing replacement: online guides and video tutorials
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  11. Step 13
    Clean the hub bearing mounting seat. Use WD-40 spray.
    Step 14
    Replacing Wheel Bearing on Ford Fusion ju2 2012 1.4 TDCi by yourself
    Press a new bearing into the wheel hub. Use a bush and bearing driver set. Use a hammer.
    AUTODOC recommends:
    Replacement: wheel bearing – FORD FUSION (JU_). Do not use excessive force during installation. This may damage the part.
  12. Step 15
    FUSION (JU_) 1.25 2002 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD FUSION (JU_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD FUSION (JU_) Wheel Bearing replacement - online guide
Tips & tricks for your FORD FUSION (JU_)
View more
  • How to change Wheel bearings on FORD FUSION (JU_) 1.6 - replacement tricks
    How to restore a steering wheel | AUTODOC tips
  • Changing Hub bearing Ford Fusion ju2 1.4 TDCi - Replacement Tips
    Causes of a worn car boot damper | AUTODOC
  • Maintenance Hacks - FORD FUSION (JU_) 1.4 Wheel bearing kit replacement guide
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Replace Wheel hub bearing on Ford Fusion ju2 - free video tips
    DIY jack restoration | AUTODOC tips