Important!
This replacement procedure can be used for:
PEUGEOT 406 Break (8E/F) 1.8 16V, PEUGEOT 406 Break (8E/F) 1.9 TD, PEUGEOT 406 Break (8E/F) 2.1 TD 12V, PEUGEOT 406 Break (8E/F) 2.0 Turbo, PEUGEOT 406 Break (8E/F) 2.0 16V, PEUGEOT 406 Break (8E/F) 1.8, PEUGEOT 406 Break (8E/F) 2.0 HDI 110, PEUGEOT 406 Break (8E/F) 2.0 HDI 90, PEUGEOT 406 Break (8E/F) 2.0 16V, PEUGEOT 406 Break (8E/F) 2.2, PEUGEOT 406 Break (8E/F) 1.8 16V, PEUGEOT 406 Break (8E/F) 2.0 16V, PEUGEOT 406 Break (8E/F) 2.2 HDI, PEUGEOT 406 Break (8E/F) 2.0 16V HPi, PEUGEOT 406 Break (8E/F) 2.0 HDi 110, PEUGEOT 406 Break (8E/F) 2.0 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Springs for 406 Break (8E/F) and other PEUGEOT models
How to change Coil spring on Peugeot 406 Estate 2.0 HDI 110 – step-by-step instructions for straightforward car repair Coil spring
How to change Coil spring buffer on Peugeot 406 Estate 2.0 HDI 110 – step-by-step instructions for straightforward car repair Coil spring buffer
Tools
Replacement: coil springs – PEUGEOT 406 Break (8E/F). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Combination spanner #18
Combination spanner #18
Drive socket # 18
Drive socket # 21
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hammer
Pin punch
Hydraulic transmission jack
Crow bar
Wheel chock
Replacement: coil springs – PEUGEOT 406 Break (8E/F). AUTODOC recommends:
  • Both coil springs of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right coil springs of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: coil springs – PEUGEOT 406 Break (8E/F). Recommended sequence of steps:
  1. Step 1
    How to change Springs on Peugeot 406 Estate 1996 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 406 Break (8E/F) 2.0 HDI 110 1997 Springs - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Peugeot 406 Estate 2.0 16V 1998 Springs replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. PEUGEOT 406 Break (8E/F)
  4. Step 5
    Changing Springs on PEUGEOT 406 Break (8E/F) 2.0 HDI 90 1999 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 406 2.2 2000 Springs - online easy-to-follow instructions
    Support the rear control arm. Use a hydraulic transmission jack.
  6. Step 7
    How to replace Springs on PEUGEOT 406 Break (8E/F) 2001: download PDF manuals and video instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Springs replacement on Peugeot 406 Estate 2.0 HDi 110 2002 - download illustrated guide
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Springs on PEUGEOT 406 2003? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 10
    Clean the fastener connecting the rear knuckle to the suspension control arm. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Springs on Peugeot 406 Estate 2004 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #21. Use a drive socket #21. Use a ratchet wrench.
  10. Step 12
    Remove the fastening bolt. Use a pin punch. Use a hammer.
    Step 13
    PEUGEOT 406 2.0 HDI 110 Springs replacement: online guides and video tutorials
    Disconnect the ABS sensor wiring. Use a crowbar.
  11. Step 14
    Replacing Springs on Peugeot 406 Estate 1997 2.0 HDI 110 by yourself
    Remove the support from under the rear control arm.
    AUTODOC recommends:
    PEUGEOT 406 Break (8E/F) – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
  12. Step 15
    406 Break (8E/F) 2.2 1998 Springs DIY replacement workshop manual
    Take out the spring.
  13. Step 16
    Remove the rubber spring spacer.
    Replacement: coil springs – PEUGEOT 406 Break (8E/F). Tip:
    Inspect the rubber mounts of the suspension spring. Replace if necessary.
    Step 17
    How to change Springs on PEUGEOT 406 Break (8E/F) 1999 - tips and tricks
    Install the rubber spring spacer.
  14. Step 18
    Step-by-step recommendations for DIY replacement Peugeot 406 Estate 2000 2.2 Springs
    Install the coil spring together with the rubber mounts into the mounting seats.
  15. Step 19
    DIY replacement of Springs on PEUGEOT 406 Break (8E/F) 1.8 16V 2001 is not an issue anymore with our step-by-step tutorial
    Support the rear control arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 406 Break (8E/F) Springs replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 406 Break (8E/F) Springs replacement - online guide
Tips & tricks for your PEUGEOT 406 Break (8E/F)
View more
  • How to change Springs on PEUGEOT 406 Break (8E/F) 1.8 16V - replacement tricks
    Car checks you need to carry out on your car after the winter | AUTODOC tips
  • Changing Coil springs Peugeot 406 Estate 2.0 HDI 110 - Replacement Tips
    How to remove scratches from car plastic | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 406 Break (8E/F) 2.0 16V Spring replacement guide
    How to prevent car windows from fogging up | AUTODOC tips
  • Replace Suspension spring on Peugeot 406 Estate - free video tips
    How and why to check your oil | AUTODOC tips