Important!
This replacement procedure can be used for:
VW CC (358) 2.0 TDI, VW CC (358) 3.6 FSI 4motion, VW CC (358) 2.0 TSI, VW CC (358) 2.0 TDI, VW CC (358) 1.8 TSI, VW CC (358) 2.0 TFSI, VW CC (358) 1.8 TSI, VW CC (358) 2.0 TDI, VW CC (358) 2.0 TDI, VW CC (358) 1.4 TSI, VW CC (358) 2.0 TDI 4motion, VW CC (358) 2.0 TDI 4motion, VW CC (358) 2.0 TDI 4motion, VW CC (358) 1.4 TSI MultiFuel, VW CC (358) 1.4 TSI, VW CC (358) 2.0 TDI, VW CC (358) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CC (358) and other VW models
How to change Anti-roll bar link on VW CC 358 2.0 TDI – step-by-step instructions for straightforward car repair
Anti-roll bar link
How to change Rod / Strut, wheel suspension on VW CC 358 2.0 TDI – step-by-step instructions for straightforward car repair
Rod / Strut, wheel suspension
How to change Repair Kit, stabilizer suspension on VW CC 358 2.0 TDI – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer suspension
How to change Repair Kit, stabilizer coupling rod on VW CC 358 2.0 TDI – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer coupling rod
How to change Mounting, stabilizer coupling rod on VW CC 358 2.0 TDI – step-by-step instructions for straightforward car repair
Mounting, stabilizer coupling rod
Tools
Replacement: anti roll bar links – VW CC (358). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on VW CC (358) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – VW CC (358) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on VW CC 358 2011 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace VW CC (358) 2.0 TDI 2012 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW CC (358)
  3. Step 5
    VW CC 358 2.0 TDI 4motion 2013 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on VW CC (358) 2.0 TSI 2014 by yourself
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove VW CC 3.6 FSI 4motion 2015 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #16. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on VW CC (358) 2016: download PDF manuals and video instructions
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on VW CC 358 2.0 TDI 4motion 2011 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on VW CC 2012? This free workshop manual will help you to do it yourself
    Support the arm. Use a hydraulic transmission jack.
  9. Step 11
    Changing of Anti Roll Bar Links on VW CC 358 2013 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
  10. Step 12
    VW CC 2.0 TSI Anti Roll Bar Links replacement: online guides and video tutorials
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Anti Roll Bar Links on VW CC 358 2015 2.0 TDI by yourself
    Ιnstall the transverse stabilizer link.
  12. Step 14
    CC (358) 3.6 FSI 4motion 2016 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the stabiliser link fastener. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  13. Step 15
    How to change Anti Roll Bar Links on VW CC (358) 2011 - tips and tricks
    Raise the hydraulic transmission jack by 10-15 cm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW CC (358) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW CC (358) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW CC (358)
View more
  • How to change Drop links on VW CC (358) 1.4 TSI - replacement tricks
    How to prevent car windows from fogging up | AUTODOC tips
  • Changing Stabilizer link VW CC 358 2.0 TDI - Replacement Tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Maintenance Hacks - VW CC (358) 2.0 TDI 4motion Sway bar link replacement guide
    How to easily repair a punctured tyre | AUTODOC tips
  • Replace Drop link on VW CC 358 - free video tips
    3 things to know before buying summer tyres | AUTODOC tips