How to change rear anti roll bar links on VOLVO XC70 Cross Country (295) – replacement guide
downloads:
2
Views:
18
0
Users voted – 0
Important!
This replacement procedure can be used for:
VOLVO XC70 Cross Country (295) 2.4 T XC AWD,
VOLVO XC70 Cross Country (295) D5 XC AWD,
VOLVO XC70 Cross Country (295) 2.5 T XC AWD,
VOLVO XC70 Cross Country (295) D5 AWD
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for XC70 Cross Country (295) and other VOLVO models
Replace the stabiliser links on VOLVO XC70 CROSS COUNTRY in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.
Replacement: anti roll bar links – VOLVO XC70 CROSS COUNTRY. Recommended sequence of steps:
Step 1
Lift the car using a jack or place it over an inspection pit.
Step 2
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 3
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
Step 4
Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
Step 5
Remove the fastening bolt.
Step 6
Remove the stabilizer rod.
Replacement: anti roll bar links – VOLVO XC70 CROSS COUNTRY. AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 7
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 8
Ιnstall the transverse stabilizer link.
Step 9
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40. Use a torque wrench. Tighten it to 50 Nm torque.
Step 10
Install the rod fastening to the stabilizer and tighten it. Use a combination spanner #18. Use Torx T40. Use a torque wrench. Tighten it to 50 Nm torque.
Step 11
Treat all joints of the stabiliser link. Use copper grease.
Step 12
Lower the car.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Volvo XC70 Cross Country
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VOLVO XC70 Cross Country (295)
View more
How to shine your tyres | AUTODOC tips
Top 6 products for enhancing your car | AUTODOC tips
Things you should never do with your manual transmission | AUTODOC tips