Important!
This replacement procedure can be used for:
PEUGEOT 307 SW (3H) 1.6 16V, PEUGEOT 307 SW (3H) 2.0 HDI 90, PEUGEOT 307 SW (3H) 2.0 HDI 110, PEUGEOT 307 SW (3H) 1.4 16V, PEUGEOT 307 SW (3H) 1.6 HDI 110, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.6 HDI 90, PEUGEOT 307 SW (3H) 1.6 BioFlex View more

The steps may slightly vary depending on the car design.

How to change rear wheel bearing on PEUGEOT 307 (3H) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Wheel Bearing for 307 SW (3H) and other PEUGEOT models
How to change Wheel bearing kit on Peugeot 307 SW 1.6 HDI 110 – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing on Peugeot 307 SW 1.6 HDI 110 – step-by-step instructions for straightforward car repair Wheel bearing
Tools
Replacement: wheel bearing – Peugeot 307 SW. Tools you'll need:
Wire brush
All-purpose cleaning spray
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #15
Drive socket # 13
Drive socket # 32
Torx bit T50
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hammer
Flat chisel
Pliers
Bush and bearing driver set
Rubber mallet
Flat Screwdriver
Circlip pliers
Hub slide hammer puller
Water pump pliers
Crow bar
Wheel chock
Replacement: wheel bearing – Peugeot 307 SW. Professionals recommend:
  • Do not re-use the bearing assembly of your Peugeot 307 SW car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – Peugeot 307 SW. Use the following procedure:
  1. Step 1
    How to change Wheel Bearing on Peugeot 307 SW 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 307 SW (3H) 1.6 HDI 110 2003 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Peugeot 307 SW 1.6 16V 2004 Wheel Bearing replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Wheel Bearing on PEUGEOT 307 SW (3H) 2.0 16V 2005 by yourself
    Unscrew the wheel bolts.
    Replacement: wheel bearing – Peugeot 307 SW. AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. Step 5
    How to remove PEUGEOT 307 2.0 HDi 135 2006 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Wheel Bearing on PEUGEOT 307 SW (3H) 2007: download PDF manuals and video instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 7
    How hard is it to do yourself: Wheel Bearing replacement on Peugeot 307 SW 1.6 HDI 90 2008 - download illustrated guide
    Release the parking brake cable. Use water pump pliers. Use a flat screwdriver.
  8. Step 8
    Need to know how to renew Wheel Bearing on PEUGEOT 307 2009? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fastening. Use a combination spanner #15. Use a drive socket #13. Use a ratchet wrench.
  9. Step 9
    Changing of Wheel Bearing on Peugeot 307 SW 2002 won't be an issue if you follow this illustrated step-by-step guide
    Spread the brake pads. Use a crowbar.
  10. Step 10
    PEUGEOT 307 1.4 16V Wheel Bearing replacement: online guides and video tutorials
    Remove the brake caliper.
    Replacement: wheel bearing – Peugeot 307 SW. AUTODOC experts recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  11. Step 11
    Replacing Wheel Bearing on Peugeot 307 SW 2004 1.6 HDI 110 by yourself
    Remove the brake pads.
  12. Step 12
    307 SW (3H) 2.0 HDi 135 2005 Wheel Bearing DIY replacement workshop manual
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  13. Step 13
    How to change Wheel Bearing on PEUGEOT 307 SW (3H) 2006 - tips and tricks
    Unscrew the caliper bracket fastening. Use Torx T50. Use a tap wrench.
  14. Step 14
    Step-by-step recommendations for DIY replacement Peugeot 307 SW 2007 2.0 HDi 135 Wheel Bearing
    Remove the caliper bracket.
  15. Step 15
    DIY replacement of Wheel Bearing on PEUGEOT 307 SW (3H) 2.0 HDI 110 2008 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing protection cap. Use a wire brush. Use WD-40 spray.
  16. Step 16
    How to change Wheel Bearing on Peugeot 307 SW 2002 - free PDF and video manuals
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – Peugeot 307 SW. Tip:
    Some cars are not equipped with wheel hub caps.
  17. Step 17
    How to replace PEUGEOT 307 SW (3H) 1.6 HDI 110 2003 Wheel Bearing - step-by-step manuals and video guides
    Unstake the fastener of the driveshaft. Use a flat metal-working chisel. Use a hammer.
  18. Step 18
    Peugeot 307 SW 1.6 16V 2004 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench.
  19. Step 19
    Changing Wheel Bearing on PEUGEOT 307 SW (3H) 2.0 16V 2005 by yourself
    Remove the brake disc assemled with the wheel hub bearing. Use the hub slide hammer puller.
  20. Step 20
    How to remove PEUGEOT 307 2.0 HDi 135 2006 Wheel Bearing - online easy-to-follow instructions
    Clean the surface around the ABS tone ring. Use a wire brush. Use WD-40 spray.
  21. Step 21
    Remove the ABS tone ring. Use a crowbar.
    Step 22
    How to replace Wheel Bearing on PEUGEOT 307 SW (3H) 2007: download PDF manuals and video instructions
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  22. Step 23
    How hard is it to do yourself: Wheel Bearing replacement on Peugeot 307 SW 1.6 HDI 90 2008 - download illustrated guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  23. Step 24
    Need to know how to renew Wheel Bearing on PEUGEOT 307 2009? This free workshop manual will help you to do it yourself
    Clean the hub bearing mounting seat. Use WD-40 spray.
  24. Step 25
    Changing of Wheel Bearing on Peugeot 307 SW 2002 won't be an issue if you follow this illustrated step-by-step guide
    Press fit the new wheel hub bearing into the brake disc. Use a bush and bearing driver set.
    Replacement: wheel bearing – Peugeot 307 SW. Professionals recommend:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  25. Step 26
    PEUGEOT 307 1.4 16V Wheel Bearing replacement: online guides and video tutorials
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 307 SW (3H) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 307 SW (3H) Wheel Bearing replacement - online guide
Tips & tricks for your PEUGEOT 307 SW (3H)
View more
  • How to change Wheel bearings on PEUGEOT 307 SW (3H) 2.0 HDI 110 - replacement tricks
    Top 5 brake repair mistakes | AUTODOC tips
  • Changing Hub bearing Peugeot 307 SW 1.6 HDI 110 - Replacement Tips
    What to do if your car heater isn't working | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 307 SW (3H) 1.6 16V Wheel bearing kit replacement guide
    What to do if the ABS light comes on | AUTODOC tips
  • Replace Wheel hub bearing on Peugeot 307 SW - free video tips
    How to remove scratches from car plastic | AUTODOC tips