Important!
This replacement procedure can be used for:
PEUGEOT 207 (WA_, WC_) 1.6 16V VTi, PEUGEOT 207 CC (WD_) 1.6 16V, PEUGEOT 207 SW (WK_) 1.6 16V

The steps may slightly vary depending on the car design.

How to change rear wheel bearing on PEUGEOT 207 [TUTORIAL AUTODOC]

Replacement: wheel bearing – Peugeot 207 hatchback. List of the tools you'll need:
Replacement: wheel bearing – Peugeot 207 hatchback. List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #19
Drive socket # 13
Drive socket # 36
Torx bit T55
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Tap wrench
Hammer
Flat chisel
Rubber mallet
Flat Screwdriver
Crow bar
Hub slide hammer puller
Wheel chock
All the parts you need to replace – Wheel Bearing for 207 (WA_, WC_) and other PEUGEOT models
How to change Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.4 HDi – step-by-step instructions for straightforward car repair
Wheel Bearing
How to change Wheel Bearing on PEUGEOT 207 CC (WD_) 1.6 16V – tips for proper car maintenance
PEUGEOT 207 CC (WD_) 1.6 16V
Simple DIY car repair steps – Replacing Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.6 16V VTi
PEUGEOT 207 (WA_, WC_) 1.6 16V VTi
Easy tricks to help you to replace Wheel Bearing on PEUGEOT 207 SW (WK_) 1.6 16V
PEUGEOT 207 SW (WK_) 1.6 16V
How to change Wheel Bearing Kit on PEUGEOT 207 (WA_, WC_) 1.4 HDi – step-by-step instructions for straightforward car repair
Wheel Bearing Kit
How to change Wheel Bearing Kit on PEUGEOT 207 CC (WD_) 1.6 16V – tips for proper car maintenance
PEUGEOT 207 CC (WD_) 1.6 16V
Simple DIY car repair steps – Replacing Wheel Bearing Kit on PEUGEOT 207 (WA_, WC_) 1.6 16V VTi
PEUGEOT 207 (WA_, WC_) 1.6 16V VTi
Easy tricks to help you to replace Wheel Bearing Kit on PEUGEOT 207 SW (WK_) 1.6 16V
PEUGEOT 207 SW (WK_) 1.6 16V
Replacement: wheel bearing – Peugeot 207 hatchback. AUTODOC recommends:
  • Do not re-use the bearing assembly of your PEUGEOT 207 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – Peugeot 207 hatchback. Recommended sequence of steps:
  1. How to change Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2006 - free PDF and video manuals
    Step 1
    Open the bonnet.Unscrew the brake fluid reservoir cap.
  2. How to replace PEUGEOT 207 (WA_, WC_) 1.4 HDi 2007 Wheel Bearing - step-by-step manuals and video guides
    Step 2
    Secure the wheels with chocks.
    Step 3
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. PEUGEOT 207 (WA_, WC_) 1.6 HDi 2008 Wheel Bearing replacement: free workshop manuals
    Step 4
    Raise the rear of the car and secure on supports.
  4. Changing Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.4 16V 2009 by yourself
    Step 5
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Peugeot 207 hatchback
  5. How to remove PEUGEOT 207 1.6 16V VTi 2010 Wheel Bearing - online easy-to-follow instructions
    Step 6
    Remove the wheel.
  6. How to replace Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2011: download PDF manuals and video instructions
    Step 7
    Clean the brake caliper fasteners. Use a wire brush.Use all-purpose cleaning spray.
  7. How hard is it to do yourself: Wheel Bearing replacement on PEUGEOT 207 (WA_, WC_) 1.6 16V RC 2012 - download illustrated guide
    Step 8
    Unscrew the brake caliper fastening.Use a combination spanner #19.Use a drive socket #13.Use a ratchet wrench.
  8. Need to know how to renew Wheel Bearing on PEUGEOT 207 ? This free workshop manual will help you to do it yourself
    Step 9
    Spread the brake pads.Use a crowbar.
    Step 10
    Remove the brake caliper.
    Replacement: wheel bearing – Peugeot 207 hatchback. Tip from AUTODOC experts:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  9. Changing of Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Step 11
    Remove the brake pads.Use a crowbar.
  10. PEUGEOT 207 1.6 HDi Wheel Bearing replacement: online guides and video tutorials
    Step 12
    Clean the brake caliper bracket fasteners. Use a wire brush.Use WD-40 spray.
  11. Replacing Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2006 1.4 HDi by yourself
    Step 13
    Unscrew the caliper bracket fastening.Use Torx T55.Use a tap wrench.
  12. 207 (WA_, WC_) 1.6 16V VTi 2007 Wheel Bearing DIY replacement workshop manual
    Step 14
    Remove the caliper bracket.
  13. How to change Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2008 - tips and tricks
    Step 15
    Clean the brake disc fasteners.Use a wire brush.Use WD-40 spray.
  14. Step-by-step recommendations for DIY replacement PEUGEOT 207 (WA_, WC_) 2009 1.6 16V VTi Wheel Bearing
    Step 16
    Remove the wheel hub nut cap.Use a crowbar. Use a rubber mallet.
    Replacement: wheel bearing – Peugeot 207 hatchback. Tip from AUTODOC:
    In some cars, the wheel hub nut is not protected with a cap.
  15. DIY replacement of Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.4 2010 is not an issue anymore with our step-by-step tutorial
    Step 17
    Unstake the wheel hub retaining nut.Use a flat metal-working chisel.Use a hammer.
  16. How to change Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2006 - free PDF and video manuals
    Step 18
    Unscrew the hub nut.Use a drive socket #36.Use a tap wrench.
  17. How to replace PEUGEOT 207 (WA_, WC_) 1.4 HDi 2007 Wheel Bearing - step-by-step manuals and video guides
    Step 19
    Remove the brake disc assemled with the wheel hub bearing. Use the hub slide hammer puller.
  18. PEUGEOT 207 (WA_, WC_) 1.6 HDi 2008 Wheel Bearing replacement: free workshop manuals
    Step 20
    Clean the stub axle.Use a wire brush.Use all-purpose cleaning spray.
  19. Changing Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.4 16V 2009 by yourself
    Step 21
    Treat the stub axle.Use a multipurpose grease.Use a flat screwdriver.
  20. How to remove PEUGEOT 207 1.6 16V VTi 2010 Wheel Bearing - online easy-to-follow instructions
    Step 22
    Clean the brake caliper bracket from dirt and dust.Use a wire brush.Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – Peugeot 207 hatchback. After applying the spray, wait a few minutes.
  21. How to replace Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2011: download PDF manuals and video instructions
    Step 23
    Install the brake disc assembled with the wheel hub bearing.
  22. How hard is it to do yourself: Wheel Bearing replacement on PEUGEOT 207 (WA_, WC_) 1.6 16V RC 2012 - download illustrated guide
    Step 24
    Tighten the wheel hub nut.Use a drive socket #36.Use a torque wrench.Tighten it to 180 nm torque.
    Replacement: wheel bearing – Peugeot 207 hatchback. AUTODOC experts recommend:
    The wheel bearing unit must not tilt on the axle pin.
  23. Need to know how to renew Wheel Bearing on PEUGEOT 207 ? This free workshop manual will help you to do it yourself
    Step 25
    Restake the wheel hub retaining nut.Use a flat metal-working chisel.Use a hammer.
  24. Changing of Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Step 26
    Install the cap of the hub nut. Use a rubber mallet.
  25. PEUGEOT 207 1.6 HDi Wheel Bearing replacement: online guides and video tutorials
    Step 27
    Clean the mounting seats of the caliper and its bracket.Use a wire brush.Use WD-40 spray.
  26. Replacing Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2006 1.4 HDi by yourself
    Step 28
    Install the brake caliper bracket.
  27. 207 (WA_, WC_) 1.6 16V VTi 2007 Wheel Bearing DIY replacement workshop manual
    Step 29
    Tighten the brake caliper bracket.Use Torx T55.Use a torque wrench.Tighten it to 70 Nm torque.
  28. How to change Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2008 - tips and tricks
    Step 30
    Treat the brake caliper piston.Use a nylon cleaning brush.Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – Peugeot 207 hatchback. After applying the spray, wait a few minutes.
  29. Step-by-step recommendations for DIY replacement PEUGEOT 207 (WA_, WC_) 2009 1.6 16V VTi Wheel Bearing
    Step 31
    Press in the brake caliper piston.Use brake caliper wind back tool.
  30. DIY replacement of Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.4 2010 is not an issue anymore with our step-by-step tutorial
    Step 32
    Install the brake pads.
  31. How to change Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2006 - free PDF and video manuals
    Step 33
    Install the brake caliper and fix it.Use a combination spanner #19.Use a drive socket #13.Use a torque wrench.Tighten it to 40 Nm torque.
  32. How to replace PEUGEOT 207 (WA_, WC_) 1.4 HDi 2007 Wheel Bearing - step-by-step manuals and video guides
    Step 34
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  33. PEUGEOT 207 (WA_, WC_) 1.6 HDi 2008 Wheel Bearing replacement: free workshop manuals
    Step 35
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – Peugeot 207 hatchback. After applying the spray, wait a few minutes.
  34. Changing Wheel Bearing on PEUGEOT 207 (WA_, WC_) 1.4 16V 2009 by yourself
    Step 36
    Install the wheel.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. Peugeot 207 hatchback
  35. How to remove PEUGEOT 207 1.6 16V VTi 2010 Wheel Bearing - online easy-to-follow instructions
    Step 37
    Screw in the wheel bolts.Use wheel impact socket #17.
  36. How to replace Wheel Bearing on PEUGEOT 207 (WA_, WC_) 2011: download PDF manuals and video instructions
    Step 38
    Lower the car and working in a cross order, tighten the wheel bolts.Use wheel impact socket #17.Use a torque wrench.Tighten it to 120 Nm torque.
  37. How hard is it to do yourself: Wheel Bearing replacement on PEUGEOT 207 (WA_, WC_) 1.6 16V RC 2012 - download illustrated guide
    Step 39
    Remove the jacks and chocks.
    Replacement: wheel bearing – Peugeot 207 hatchback. AUTODOC experts recommend:
    Check the brake fluid level in the expansion tank and refill if necessary.
  38. Need to know how to renew Wheel Bearing on PEUGEOT 207 ? This free workshop manual will help you to do it yourself
    Step 40
    Tighten the brake fluid reservoir cap. Close the hood.
    Replacement: wheel bearing – Peugeot 207 hatchback. AUTODOC experts recommend:
    Without starting the engine, press the brake pedal several times until you feel significant resistance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
PEUGEOT 207 (WA_, WC_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 207 (WA_, WC_) Wheel Bearing replacement - online guide
Tips & tricks for your PEUGEOT 207 (WA_, WC_)
View more
  • How to change Hub bearing on PEUGEOT 207 (WA_, WC_) 1.4 - replacement tricks
    How to clean an EGR valve | AUTODOC tips
  • Changing Wheel bearing kit PEUGEOT 207 (WA_, WC_) 1.4 HDi - Replacement Tips
    How to choose a used car | AUTODOC
  • Maintenance Hacks - PEUGEOT 207 (WA_, WC_) 1.6 HDi Wheel hub bearing replacement guide
    How to remove a broken bolt without welding | AUTODOC TIPS
  • Replace Axle shaft bearing on PEUGEOT 207 (WA_, WC_) - free video tips
    How not to care for your car's interior | AUTODOC

Manuals for PEUGEOT models