Carefully check the other engine mounts and replace them if necessary.
Step 11
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Step 12
Install the engine mount to its mounting seat.
Step 13
Install the fastening bolts. Use a crowbar.
Step 14
Screw in the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
Step 15
Screw in the engine mount fastener that connects it to the gearbox housing. Use a drive socket #16. Use a ratchet wrench.
Step 16
Tighten the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a torque wrench. Tighten it to 60 nm torque.
Step 17
Tighten the fastening bolt connecting the engine mount to the gearbox housing.
Use a drive socket #16. Use a torque wrench. Tighten it to 60 nm torque.
Step 18
Remove the support from under the gearbox.
AUTODOC recommends:
Peugeot 207 hatchback – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
Step 19
Treat the engine mount fasteners. Use copper grease.
Step 20
Lower the car.
Step 21
Remove the fender protection cover.
Step 22
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 207 Hatchback model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.