
Disclaimer
How to change number plate light on OPEL Vivaro A Van (X83) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
OPEL Vivaro A Van (X83) 1.9 DI (F7), OPEL Vivaro A Van (X83) 1.9 DTI (F7), OPEL Vivaro A Van (X83) 2.0 16V (F7), OPEL Vivaro A Van (X83) 2.5 DTI (F7), OPEL Vivaro A Van (X83) 2.0 ECOTEC (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7) … View more
The steps may slightly vary depending on the car design.
OPEL Vivaro A Van (X83) 1.9 DI (F7), OPEL Vivaro A Van (X83) 1.9 DTI (F7), OPEL Vivaro A Van (X83) 2.0 16V (F7), OPEL Vivaro A Van (X83) 2.5 DTI (F7), OPEL Vivaro A Van (X83) 2.0 ECOTEC (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.0 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7), OPEL Vivaro A Van (X83) 2.5 CDTI (F7) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Number Plate Light for Vivaro A Van (X83) and other OPEL models
Alternative products

Electronic spray
8 mm socket
10 mm socket
Ratchet wrench
Masking tape
Plastic trim removal tool
Slotted screwdriver
Clip removal tool
Transmission jack
Wide wooden block
Replacement: number plate light – OPEL VIVARO Box (F7). Tip from AUTODOC experts:
- All the work should be carried out with the ignition switched off.
Replacement: number plate light – OPEL VIVARO Box (F7). Take the following steps:
- Step 1
Secure the number plate light. Use masking tape. - Step 2
Open the rear door. - Step 3
Prop up the rear door. Use a transmission jack.Replacement: number plate light – OPEL VIVARO Box (F7). AUTODOC recommends:Place a wide wooden block between the jack and the supported part to avoid damaging it. - Step 4
Detach the rear door trim panel. Use a clip removal tool. - Step 5
Unscrew the number plate light fasteners. Use a 10 mm socket. Use a ratchet wrench. - Step 6
Remove the back cover of the number plate light. - Step 7Remove the transmission jack from under the rear door.Step 8Close the rear door.Step 9
Remove the masking tape. - Step 10
Remove the number plate light. - Step 11
Detach the number plate light connector. Use a slotted screwdriver. - Step 12
Treat the number plate light connector. Use an electronic spray. - Step 13
Attach the connector to a new number plate light. - Step 14
Install the number plate light.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Vivaro A Van (X83) model
Popular maintenance tutorials for Opel Vivaro Van
Complete guides for changing the Number Plate Light on different OPEL VIVARO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Vivaro A Van (X83)
View more
How to align the timing marks correctly on an EA888 engine
TOP 5 mistakes during DIY oil change | AUTODOC tips
How to Make a DIY Foam Sprayer | AUTODOC tips
Don’t Replace, Restore: Fixing Damaged Threads at Home
Most commonly replaced car parts on OPEL VIVARO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

















