Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 LPG, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad View more

The steps may slightly vary depending on the car design.

How to change tie rod end on NISSAN QASHQAI (J10, NJ10) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Track Rod End for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
How to change Track rod end on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Track rod end
How to change Rod Assembly on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Rod Assembly
How to change Repair Kit, tie rod on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Repair Kit, tie rod
How to change Mounting Kit, tie rod end on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Mounting Kit, tie rod end
Tools
Replacement: track rod end – Nissan Qashqai J10. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #19
Combination spanner #22
Drive socket # 16
Drive socket # 17
Wheel impact socket #21
Ratchet wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – Nissan Qashqai J10. AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – Nissan Qashqai J10. Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on Nissan Qashqai j10 2006 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Track Rod End - step-by-step manuals and video guides
    Raise the front of the car and secure on supports.
  3. Step 4
    Nissan Qashqai j10 2.0 dCi Allrad 2008 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Nissan Qashqai J10
  4. Step 5
    Changing Track Rod End on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  9. Step 10
    Changing of Track Rod End on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    NISSAN QASHQAI 2.0 dCi Allrad Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Nissan Qashqai j10 2008 1.5 dCi by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi 2009 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – Nissan Qashqai J10. Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2010 - tips and tricks
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Track Rod End replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
  • How to change Tie rod end on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 - replacement tricks
    TOP 4 car cleaning products | AUTODOC tips
  • Changing Outer tie rod Nissan Qashqai j10 1.5 dCi - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad Track rod end ball joint replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Replace Outer tie rod end on Nissan Qashqai j10 - free video tips
    What to do if your car heater isn't working | AUTODOC tips