Important!
This replacement procedure can be used for:
NISSAN MICRA III (K12) 160 SR, NISSAN Micra C+C III (K12) 1.6 160 SR, NISSAN Note (E11, NE11) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN TIIDA Saloon (SC11X) 1.6, NISSAN TIIDA Hatchback 1.6, NISSAN NV200 Box Body / Estate 1.6 16V (M20, M20M), NISSAN NV200 / Evalia Minibus 1.6 16V (M20, M20M)

The steps may slightly vary depending on the car design.

How to change spark plug on NISSAN QASHQAI 1 (J10) [TUTORIAL AUTODOC]

Replacement: spark plugs – Nissan Qashqai J10. Tools you'll need:
Replacement: spark plugs – Nissan Qashqai J10. Tools you'll need:
Electronic spray
High-temperature anti-seize lubricant
Torque wrench
Spark plug socket # 16
Drive socket # 8
Drive socket # 10
Ratchet wrench
Round-nose pliers
Flat screwdriver
Telescoping magnet
Fender cover
All the parts you need to replace – Spark Plug for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
How to change Spark Plug on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Spark Plug
How to change Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 – tips for proper car maintenance
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6
Simple DIY car repair steps – Replacing Spark Plug on NISSAN Micra C+C III (K12) 1.6 160 SR
NISSAN Micra C+C III (K12) 1.6 160 SR
Easy tricks to help you to replace Spark Plug on NISSAN MICRA III (K12) 160 SR
NISSAN MICRA III (K12) 160 SR
Spark Plug removal & installation, incredibly easy steps for NISSAN Note (E11, NE11) 1.6
NISSAN Note (E11, NE11) 1.6
Changing Spark Plug on NISSAN TIIDA Hatchback 1.6 – tips for first time repair
NISSAN TIIDA Hatchback 1.6
Main steps for Spark Plug replacement on NISSAN TIIDA Saloon (SC11X) 1.6
NISSAN TIIDA Saloon (SC11X) 1.6
How to change Spark Plug on NISSAN NV200 Box Body / Estate 1.6 16V (M20, M20M) – tips for proper car maintenance
NISSAN NV200 Box Body / Estate 1.6 16V (M20, M20M)
Simple DIY car repair steps – Replacing Spark Plug on NISSAN NV200 / Evalia Minibus 1.6 16V (M20, M20M)
NISSAN NV200 / Evalia Minibus 1.6 16V (M20, M20M)
Replacement: spark plugs – Nissan Qashqai J10. Professionals recommend:
  • The replacement procedure is the same for all spark plugs.
  • All work should be done with the engine stopped.
Replacement: spark plugs – Nissan Qashqai J10. Recommended sequence of steps:
  1. How to change Spark Plug on Nissan Qashqai j10 2006 - free PDF and video manuals
    Step 1
    Open the hood.
  2. How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Spark Plug - step-by-step manuals and video guides
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  3. Nissan Qashqai j10 2.0 dCi Allrad 2008 Spark Plug replacement: free workshop manuals
    Step 3
    Disconnect the crankcase ventilation hose from the air duct.Use round-nose pliers.
  4. Changing Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Step 4
    Unscrew the clamps and fasteners on the air filter intake pipe.Use a drive socket #10.Use a ratchet wrench.
  5. How to remove NISSAN QASHQAI 1.6 dCi 2010 Spark Plug - online easy-to-follow instructions
    Step 5
    Disconnect the air intake pipe from the air filter housing.
  6. How to replace Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Step 6
    Unscrew the fasteners connecting the throttle valve to the intake manifold.Use a drive socket #8.Use a ratchet wrench.
  7. How hard is it to do yourself: Spark Plug replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Step 7
    Release the clamp and detach the connector and the vacuum hose from the intake manifold near the throttle valve.Use round-nose pliers.
  8. Need to know how to renew Spark Plug on NISSAN QASHQAI ? This free workshop manual will help you to do it yourself
    Step 8
    Unscrew the fasteners of the intake manifold bracket.Use a drive socket #10.
  9. Changing of Spark Plug on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Detach the vacuum booster hose from the intake manifold.
  10. NISSAN QASHQAI 2.0 dCi Allrad Spark Plug replacement: online guides and video tutorials
    Step 10
    Unscrew the intake manifold fasteners. Use a drive socket #10.Use a ratchet wrench.
  11. Replacing Spark Plug on Nissan Qashqai j10 2008 1.5 dCi by yourself
    Step 11
    Remove the intake manifold.
  12. Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi 2009 Spark Plug DIY replacement workshop manual
    Step 12
    Cover the intake manifold passages with a microfibre towel to prevent dust and dirt from getting inside.
  13. How to change Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2010 - tips and tricks
    Step 13
    Unscrew the ignition coil bracket.Use a drive socket #10.
  14. Step-by-step recommendations for DIY replacement Nissan Qashqai j10 2011 1.6 dCi Spark Plug
    Step 14
    Take out the ignition coil from the spark plug well.
  15. DIY replacement of Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 2012 is not an issue anymore with our step-by-step tutorial
    Step 15
    Clean dirt, dust and debris from inside the spark plug well.
  16. How to change Spark Plug on Nissan Qashqai j10 2006 - free PDF and video manuals
    Step 16
    Unscrew the spark plugs. Use the spark plug socket #16.Use a ratchet wrench.
  17. How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Spark Plug - step-by-step manuals and video guides
    Step 17
    Take out the spark plugs.Use a telescoping magnet.
  18. Nissan Qashqai j10 2.0 dCi Allrad 2008 Spark Plug replacement: free workshop manuals
    Step 18
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.Treat the surface of the terminals of the new spark plugs. Use electronic spray.
  19. Changing Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Step 19
    Install the new spark plugs into their mounting seats.
  20. How to remove NISSAN QASHQAI 1.6 dCi 2010 Spark Plug - online easy-to-follow instructions
    Step 20
    Screw new spark plugs and tighten them.Use the spark plug socket #16.Use a torque wrench.Tighten it to 25 nm torque.
    Replacement: spark plugs – Nissan Qashqai J10. Tip:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
  21. How to replace Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Step 21
    Install the ignition coil to the spark plug well.Make sure you hear a click indicating that it is locked in place.
    AUTODOC recommends:
    Follow the installation sequence.
  22. How hard is it to do yourself: Spark Plug replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Step 22
    Tighten the ignition coil fastening.Use a drive socket #10.Use a torque wrench.Tighten it to 9 nm torque.
  23. Need to know how to renew Spark Plug on NISSAN QASHQAI ? This free workshop manual will help you to do it yourself
    Step 23
    Remove the microfibre towel from the intake manifold.
  24. Changing of Spark Plug on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Step 24
    Remove the intake manifold gasket.Use a flat screwdriver.
  25. NISSAN QASHQAI 2.0 dCi Allrad Spark Plug replacement: online guides and video tutorials
    Step 25
    Install the new intake manifold gasket.
  26. Replacing Spark Plug on Nissan Qashqai j10 2008 1.5 dCi by yourself
    Step 26
    Install the intake manifold.
  27. Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi 2009 Spark Plug DIY replacement workshop manual
    Step 27
    Tighten the intake manifold fasteners.Use a drive socket #10.Use a torque wrench.Tighten it to 15 nm torque.
  28. How to change Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2010 - tips and tricks
    Step 28
    Tighten the fasteners of the intake manifold bracket.Use a drive socket №10.Use a torque wrench.Tighten it to 15 nm torque.
  29. Step-by-step recommendations for DIY replacement Nissan Qashqai j10 2011 1.6 dCi Spark Plug
    Step 29
    Attach the vacuum booster hose to the intake manifold.
  30. DIY replacement of Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 2012 is not an issue anymore with our step-by-step tutorial
    Step 30
    Squeeze and install the vacuum booster hose clamp. Use round-nose pliers.
  31. How to change Spark Plug on Nissan Qashqai j10 2006 - free PDF and video manuals
    Step 31
    Install the throttle valve on the intake manifold.
  32. How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Spark Plug - step-by-step manuals and video guides
    Step 32
    Tighten the throttle valve fasteners.Use a drive socket #8.Use a torque wrench.Tighten it to 16 nm torque.
  33. Nissan Qashqai j10 2.0 dCi Allrad 2008 Spark Plug replacement: free workshop manuals
    Step 33
    Attach the connector and the vacuum hose to the intake manifold near the throttle valve.Use round-nose pliers.
  34. Changing Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Step 34
    Connect the air intake pipe to the air filter housing.
  35. How to remove NISSAN QASHQAI 1.6 dCi 2010 Spark Plug - online easy-to-follow instructions
    Step 35
    Connect the crankcase ventilation hose to the air duct.Use round-nose pliers.
  36. How to replace Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Step 36
    Tighten the clamp and fasteners on the air filter intake pipe.Use a drive socket #10.Use a ratchet wrench.
  37. How hard is it to do yourself: Spark Plug replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Step 37
    Run the engine for a few minutes.This is necessary in order to make sure that the component operates properly.
  38. Need to know how to renew Spark Plug on NISSAN QASHQAI ? This free workshop manual will help you to do it yourself
    Step 38
    Shut off the engine.
    Step 39
    Remove the fender protection cover.
  39. Changing of Spark Plug on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Step 40
    Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Spark Plug replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
  • How to change Spark Plug on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 - replacement tricks
    How to clean a really dirty car interior | AUTODOC
  • Changing Spark Plug Nissan Qashqai j10 1.5 dCi - Replacement Tips
    How to install snow chains | AUTODOC
  • Maintenance Hacks - NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad Spark Plug replacement guide
    How to diagnose engine malfunctions with an OBD2 scanner | AUTODOC
  • Replace Spark Plug on Nissan Qashqai j10 - free video tips
    How to get rid of a bad smell in your car | AUTODOC

Manuals for NISSAN models