Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 LPG, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad View more

The steps may slightly vary depending on the car design.

How to change ignition coil on NISSAN QASHQAI 1 (J10) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Ignition Coil for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
How to change Ignition coil on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Ignition coil
How to change Puller, ignition coil unit on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Puller, ignition coil unit
Tools
Replacement: ignition coil – Nissan Qashqai J10. List of the tools you'll need:
Electronic spray
Torque wrench
Drive socket # 8
Drive socket # 10
Ratchet wrench
Round-nose pliers
Flat screwdriver
Microfibre towel
Fender cover
Replacement: ignition coil – Nissan Qashqai J10. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – Nissan Qashqai J10. Use the following procedure:
  1. Step 1
    How to change Ignition Coil on Nissan Qashqai j10 2006 - free PDF and video manuals
    Open the hood.
  2. Step 2
    How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Ignition Coil - step-by-step manuals and video guides
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  3. Step 3
    Nissan Qashqai j10 2.0 dCi Allrad 2008 Ignition Coil replacement: free workshop manuals
    Disconnect the crankcase ventilation hose from the air duct. Use round-nose pliers.
  4. Step 4
    Changing Ignition Coil on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Unscrew the clamps and fasteners on the air filter intake pipe. Use a drive socket #10. Use a ratchet wrench.
  5. Step 5
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Ignition Coil - online easy-to-follow instructions
    Disconnect the air intake pipe from the air filter housing.
  6. Step 6
    How to replace Ignition Coil on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Unscrew the fasteners connecting the throttle valve to the intake manifold. Use a drive socket #8. Use a ratchet wrench.
  7. Step 7
    How hard is it to do yourself: Ignition Coil replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Release the clamp and detach the connector and the vacuum hose from the intake manifold near the throttle valve. Use round-nose pliers.
  8. Step 8
    Need to know how to renew Ignition Coil on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Unscrew the fasteners of the intake manifold bracket. Use a drive socket #10.
  9. Step 9
    Changing of Ignition Coil on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Detach the vacuum booster hose from the intake manifold.
  10. Step 10
    NISSAN QASHQAI 2.0 dCi Allrad Ignition Coil replacement: online guides and video tutorials
    Unscrew the intake manifold fasteners. Use a drive socket #10. Use a ratchet wrench.
  11. Step 11
    Replacing Ignition Coil on Nissan Qashqai j10 2008 1.5 dCi by yourself
    Remove the intake manifold.
  12. Step 12
    Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi 2009 Ignition Coil DIY replacement workshop manual
    Cover the intake manifold passages with a microfibre towel to prevent dust and dirt from getting inside.
  13. Step 13
    How to change Ignition Coil on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2010 - tips and tricks
    Detach the connector from the ignition coil.
  14. Step 14
    Step-by-step recommendations for DIY replacement Nissan Qashqai j10 2011 1.6 dCi Ignition Coil
    Unscrew the ignition coil bracket. Use a drive socket #10.
  15. Step 15
    DIY replacement of Ignition Coil on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 2012 is not an issue anymore with our step-by-step tutorial
    Take out the ignition coil from the spark plug well.
  16. Step 16
    Clean dirt, dust and debris from inside the spark plug well.
    Step 17
    How to change Ignition Coil on Nissan Qashqai j10 2006 - free PDF and video manuals
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  17. Step 18
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
    Step 19
    How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Ignition Coil - step-by-step manuals and video guides
    Tighten the ignition coil fastening. Use a drive socket #10. Use a torque wrench. Tighten it to 7 nm torque.
  18. Step 20
    Nissan Qashqai j10 2.0 dCi Allrad 2008 Ignition Coil replacement: free workshop manuals
    Plug in the ignition coil connector.
  19. Step 21
    Changing Ignition Coil on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Remove the microfibre towel from the intake manifold.
  20. Step 22
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Ignition Coil - online easy-to-follow instructions
    Remove the intake manifold gasket. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Ignition Coil replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
  • How to change Coil pack on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 - replacement tricks
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Changing Ignition coil pack Nissan Qashqai j10 1.5 dCi - Replacement Tips
    How to wash your car in winter | AUTODOC tips
  • Maintenance Hacks - NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad Ignition coils replacement guide
    5 tools that make car repair incredibly simple | AUTODOC tips
  • Replace Coil packs on Nissan Qashqai j10 - free video tips
    5 car tips for a winter's day | AUTODOC tips