Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on NISSAN QASHQAI (J10, NJ10) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Anti Roll Bar Links for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
How to change Anti-roll bar link on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Anti-roll bar link
How to change Rod / Strut, wheel suspension on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Rod / Strut, wheel suspension
How to change Repair Kit, stabilizer suspension on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer suspension
How to change Repair Kit, stabilizer coupling rod on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer coupling rod
How to change Mounting, stabilizer coupling rod on Nissan Qashqai j10 1.5 dCi – step-by-step instructions for straightforward car repair
Mounting, stabilizer coupling rod
Tools
Replacement: anti roll bar links – Nissan Qashqai J10. Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Combination spanner #19
Combination spanner #21
Drive socket # 19
Drive socket # 21
Wheel impact socket #21
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – Nissan Qashqai J10. Tip from AUTODOC experts:
  • Replace the stabiliser links on Nissan Qashqai J10 in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – Nissan Qashqai J10 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Nissan Qashqai j10 2006 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    How to replace NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi 2007 Anti Roll Bar Links - step-by-step manuals and video guides
    Raise the front of the car and secure on supports.
  3. Step 4
    Nissan Qashqai j10 2.0 dCi Allrad 2008 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – Nissan Qashqai J10. Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi 2009 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2011: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #21. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Nissan Qashqai j10 2.0 Allrad 2012 - download illustrated guide
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #17. Use a combination spanner #21.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – Nissan Qashqai J10. AUTODOC recommends:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Nissan Qashqai j10 2006 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    NISSAN QASHQAI 2.0 dCi Allrad Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Qashqai / Qashqai +2 I (J10, NJ10) Anti Roll Bar Links replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
  • How to change Drop links on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 - replacement tricks
    3 things that cause engine damage | AUTODOC tips
  • Changing Stabilizer link Nissan Qashqai j10 1.5 dCi - Replacement Tips
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Maintenance Hacks - NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad Sway bar link replacement guide
    What to do if the TPMS light is on | AUTODOC tips
  • Replace Drop link on Nissan Qashqai j10 - free video tips
    How do EGR valves work? | AUTODOC